Triggers & Guards

What It Does First released December 23 of 2009, the Apex 1-Dot Fully Machined Sear was designed to enhance the performance of the Smith & Wesson M&P chambered in 9mm or .40S&W. Our modified geometry will not only improve the over-travel and sear reset characteristics, but dramatically reduce the trigger pull weight in most pistols to approximately sub 5.0 lbs. Expected Results Reduced trigger pull weight Shortened over-travel Improved reset Applicable To What Gun(s) Works with all current...

The Geissele 2 Stage (G2S) was designed to be a high quality, cost effective option of the SSA. The G2S is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The G2S is manufactured from the same tool steel as the SSA. Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability is the same. The G2S however has a different way of holding the hammer pin in place, there is no...

What It Does The Apex 2-Dot Fully Machined Sear was designed to enhance the performance of the Smith & Wesson M&P .45 and M&P Shield. Our modified geometry will not only improve the over-travel and sear reset characteristics, but dramatically reduce the trigger pull weight in most pistols to approximately sub 5.0 lbs. Expected Results Reduced trigger pull weight Shortened over-travel mproved reset Applicable To What Gun(s) Works with all current production Smith & Wesson M&P 45 series pistols,...

2-Stage Trigger - Curved However, keeping up with high demand has been difficult since introduction. CMC is confident the new production tooling and setup, incorporating the most advanced methods available, will not only yield the highest quality, but will also keep the supply lines full so every AR-15 shooter who places the highest demands on quality, function and reliability, will no longer have extensive lead times for obtaining these innovative trigger groups. And thanks to our...

CMC's innovative, self-contained and easy-to-install AR-15 trigger groups, have been completely re-tooled to maximize production capacities, incorporate new design enhancements and reduce cost. CMC's AR-15 trigger groups have always yielded exceptional trigger pull dynamics for our tens of thousands of satisfied customers.

What It Does The Apex Action Enhancement Trigger directly replaces the factory hinged trigger with a solid body aluminum trigger, and a center mounted pivoting safety. The rounded face of the trigger provides a smooth comfortable surface for the shooter?s finger while firing. The trigger also reduces pre-travel and over-travel from the factory trigger. The Apex Duty/Carry Kit is engineered to provide the M&P M2.0 (and M&P 45) pistol owner with a smooth, consistent 5.0 to 5.5 lbs. trigger pull...

What It Does The Action Enhancement Kit for Glock pistols features the Apex Action Enhancement Purple Trigger, with Gen 3 Factory Trigger Bar, Apex Ultimate Safety Plunger for Glock and Apex Performance Connector. The kit is a direct drop-in replacement of the factory polymer trigger, safety plunger and connector and provides for a smoother trigger pull with reduced travel, reduced reset, a crisp break and approximately a 1 lb. reduction in trigger pull weight. Expected Results Direct drop-in...

What It Does The Action Enhancement Kit for Glock pistols features the Apex Action Enhancement Purple Trigger, with Gen 3 Factory Trigger Bar, Apex Ultimate Safety Plunger for Glock and Apex Performance Connector. The kit is a direct drop-in replacement of the factory polymer trigger, safety plunger and connector and provides for a smoother trigger pull with reduced travel, reduced reset, a crisp break and approximately a 1 lb. reduction in trigger pull weight. Expected Results Direct drop-in...

What It Does The Apex Action Enhancement Trigger directly replaces the factory hinged trigger with a solid body polymer trigger, and a center mounted pivoting safety. The rounded face of the trigger provides a smooth comfortable surface for the shooter?s finger while firing. The trigger also reduces pre-travel and over-travel from the factory trigger. The Apex Duty/Carry Kit is engineered to provide the M&P M2.0 (and M&P 45) pistol owner with a smooth, consistent 5.0 to 5.5 lbs. trigger pull...

What It Does This kit is a combination of the Apex Duty/Carry Kit for the M&P Shield (9/40 only) and the Apex Action Enhancement Trigger for the M&P Shield (9/40 only). The Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety that maintains factory safety values.The Apex Duty/Carry Kit was designed to provide the M&P Shield pistol...

What It Does This kit is a combination of the Apex Duty/Carry Kit for the M&P Shield (9/40 only) and the Apex Action Enhancement Trigger for the M&P Shield (9/40 only). The Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety that maintains factory safety values.The Apex Duty/Carry Kit was designed to provide the M&P Shield pistol...

What It Does The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break. When paired with the Apex Ultimate Safety Plunger for Glock, an even smoother trigger uptake can be achieved. Expected Results Direct drop-in replacement of factory polymer trigger Reduces trigger over travel and reset distance Smooth...

What It Does The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break. When paired with the Apex Ultimate Safety Plunger for Glock, an even smoother trigger uptake can be achieved. Expected Results Direct drop-in replacement of factory polymer trigger Reduces trigger over travel and reset distance Smooth...

What It Does The Apex Action Enhancement Trigger for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break. When paired with the Apex Ultimate Safety Plunger for Glock, an even smoother trigger uptake can be achieved. Expected Results Direct drop-in replacement of factory polymer trigger Smooth uptake and reset Reduces trigger over travel and reset distance Shortens reset length...

What It Does The Apex Action Enhancement Trigger for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break. When paired with the Apex Ultimate Safety Plunger for Glock, an even smoother trigger uptake can be achieved. Expected Results Direct drop-in replacement of factory polymer trigger Smooth uptake and reset Reduces trigger over travel and reset distance Shortens reset length...

What It Does The Apex Action Enhancement Trigger Kit for the M&P Shield 45 directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces trigger pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The Apex...

What It Does The Apex Action Enhancement Trigger Kit for the M&P Shield (9/40 only) directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces Trigger pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face....

What It Does The Apex Action Enhancement Trigger Kit for the M&P Shield (9/40 only) directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces Trigger pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face....

What Is Does The Glock Action Enhancement Trigger is a direct drop-in replacement of the factory polymer trigger of the Gen 5 Glock 17 and Glock 19 pistols and reduces pre-travel, overall trigger travel and trigger reset, provides a smooth uptake and reset while delivering a crisp trigger break. The Performance Connector for Glock pistols reduces the factory trigger pull weight by approximately one pound. Expected Results Direct drop-in replacement of factory polymer trigger and connector...

What Is Does The Action Enhancement Trigger is a direct drop-in replacement of the factory polymer trigger and reduces pre-travel, overall trigger travel and trigger reset, provides a smooth uptake and reset while delivering a crisp trigger break. Expected Results Direct drop-in replacement of factory polymer trigger. Smooths uptake and reset Reduces trigger pre-travel, overall travel and reset distance Crisp trigger break Center mounted pivoting safety maintains factory safety values...

1. Performance Advantages for the Shooter The ALG Defense ACT trigger pull is smoother and sharper than a stock trigger. This is accomplished by polishing the sear surfaces smooth and HardLubing the trigger components. Sear geometry has not been changed from the standard profile so the high reliability that the stock trigger is known for is unchanged. Trigger and hammer are made from true 8620 alloy steel military specification castings, correctly carburized, quenched and tempered for high...

CMC's AK drop-in trigger group is the ultimate upgrade for your AK47 variant. With its 100% modular, CNC-machined, and easy to install design, our trigger group will give your AK the cleanest, most reliable trigger pull its ever had. All versions are preset with a factory pull of 3.5/4.5 pounds.

CMC's AK drop-in trigger group is the ultimate upgrade for your AK47 variant. With its 100% modular, CNC-machined, and easy to install design, our trigger group will give your AK the cleanest, most reliable trigger pull its ever had. All versions are preset with a factory pull of 3.5/4.5 pounds.

The ALG AK Trigger (AKT) is a single stage trigger designed for the AK47 and AK74 variant platforms. The AKT features a smoother and shorter trigger pull than the stock trigger and is ideal for combat and home defense use. It is machined from triple alloy steel and has a corrosion resistant Manganese Phosphate finish.The AKT features the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT...

The ALG Galil Trigger–Ultimate with Lightning Bow (AGT-UL) is a single stage trigger based on the AKT-UL and designed for the IWI Galil Ace rifle and pistol platform. The AGT-UL is machined from gun quality alloy steel and utilizes a Lightning Bow. The AKT-UL features a smooth trigger that is shorter and crisper than the stock 2 stage trigger. This design is ideal for precision and target shooting. The recommended pull weight of the AGT-UL is approximately 3.5 lbs.

What It Does The Apex Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a solid body machined aluminum trigger, and a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The flat target style trigger causes the shooter to place their finger on the center line of the trigger and encourages trigger...

What It Does Dropping this kit into your Smith & Wesson M&P will set the trigger break point farther forward than the factory trigger assembly, as well as significantly reduce the uptake and over travel. It produces a trigger pull very similar to that of a 1911 but in a polymer frame striker-fired pistol. The Forward Set Trigger body is machined from aircraft-grade aluminum and black hard anodized to last a lifetime. The smooth faced trigger comes assembled with a center pivoting safety. The...

Polymer Contour Trigger Guard with Hardware. Available in Black or FDE.

MC Triggers innovative, self-contained, and easy-to-install AR-15 trigger groups, have been completely re-tooled to maximize production capacities, incorporate new design enhancements and reduce cost. CMC Triggers AR-15 drop-in trigger groups have always yielded exceptional trigger pull dynamics for our tens of thousands of satisfied customers.

CMC Triggers innovative, self-contained, and easy-to-install AR-15 trigger groups, have been completely re-tooled to maximize production capacities, incorporate new design enhancements and reduce cost. CMC Triggers AR-15 drop-in trigger groups have always yielded exceptional trigger pull dynamics for our tens of thousands of satisfied customers.

What It Does The Apex M&P Competition Action Enhancement Kit was designed for the action shooting sports competitor. Our drop in kit will reduce trigger weight by approximately 4.0 lbs. (based on a starting trigger pull weight of 7.0 to 8.0 lbs.) Whether the game is IDPA, USPSA or Steel Challenge, our Competition Action Enhancement Kit will withstand the rigors of high speed competition. Our competition striker spring and trigger return spring are shot peened to extend service life. The kit...

What It Does The Apex Competition Action Enhancement Kit for the M&P 45 was designed for the action shooting sports competitor. Our drop in kit will reduce trigger weight by approximately 4.0 lbs. (based on a starting trigger pull weight of 7.0 to 8.0 lbs.) Whether the game is IDPA, USPSA or Steel Challenge, our Competition Action Enhancement Kit will withstand the rigors of high speed competition. Our competition striker spring and trigger return spring are shot peened to extend service life....

What It Does The Apex Duty/Carry Action Enhancement Kit is engineered to provide the M&P (9mm, .357Sig & .40S&W only) pistol owner a smooth, consistent 5.0 to 5.5 lbs. trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. The kit itself is designed to be drop-in and should not require further gunsmithing, however, armorer or gunsmith...

What It Does The Apex Duty/Carry Action Enhancement Kit is engineered to provide the M&P 45 pistol owner a smooth, consistent 5.0 to 5.5 lbs. trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. The kit itself is designed to be drop-in and should not require further gunsmithing, however, armorer or gunsmith installation is recommended. Expected...

What It Does The Apex Duty/Carry Kit for the M&P Shield was designed to provide the Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter (based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. However, armorer or gunsmith installation of the Ultimate Striker Block (USB) into...

The ECHO Sport is an economical pull and release trigger for the AR-15 platform.  The ECHO Sport has the functionality of the ECHO AR-II.  The only difference is that you select the ECHO mode from the paddle rather than the safety selector.  You can negate the second round but you do it off the paddle, rather than the safety selector. The ECHO Sport gives you all the functionality with a more affordable price.Quick list of features: 5-8lb trigger pull ⁠Not drop-in (YouTube...

What It Does The Apex Failure Resistant Extractor is designed to ensure consistent and reliable extraction under the most adverse conditions. Critical engagement surfaces and hook geometry are machined by wire EDM. The result is tolerance variation that is an order of magnitude smaller than using conventional machining techniques. This allows for a nearly drop in part that will function with the reliability you have come to expect from any part bearing the Apex name. Melonite finished for...

What It Does This kit is a combination of the Apex Duty/Carry Kit for the M&P Shield and the Apex Flat-Faced Action Enhancement Trigger for the M&P Shield (9/40 only). The Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%. It features a smooth, flat face with a center mounted pivoting safety that maintains factory safety values. The Apex Duty/Carry Kit for the M&P Shield was designed to...

What It Does The Apex Flat-Faced Action Enhancement Trigger for the M&P Shield (9/40 only) directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces pre-travel and over-travel by approximately 20%. It features a smooth, flat face with a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger...

What It Does Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber, the Apex Flat-Faced Forward Set Sear & Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. Expected Results Trigger pull weight between the 3lb (silver spring) and 4lb (green spring) mark (Dependent on trigger return spring installed) Smooth...

What It Does The Apex Flat-Faced Forward Set Trigger Kit directly replaces the factory hinged trigger with a solid body aluminum trigger featuring a center mounted pivoting safety that maintains factory safety values. The trigger reduces pre-travel and over-travel from the factory trigger. The Apex Forward Set Kit is engineered to provide the M&P M2.0 pistol owner with a smooth, consistent trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the...

The ECHO trigger is a ground breaking drop-in design that is approved by the ATF. The ECHO trigger allows shooter to select from 3 different settings. Safe Mode: Firearm will not fire. Semi-Automatic Mode : Firearm fires when trigger is pulled. ECHO Mode: Firearm fires when trigger is pulled and also when the trigger is released The ECHO trigger is designed with safety being the utmost priority. When the Shooter is in the ECHO mode and depresses the trigger one round if fires, if the target...

What It Does The Apex Ultimate Safety Plunger for Glock is designed for use in the Glock 9mm, .40 S&W, .357 Sig caliber pistols and will smooth out the trigger take-up when compared to the original factory component. The Ultimate Safety Plunger maintains proper safety function, even when timing has been adjusted through the installation of aftermarket trigger systems. Expected Results Smooths out the trigger take-up Maintains proper safety function Applicable To What Gun(s) Glock models 17,...

Hi-Speed National Match TriggersGeissele Automatics currently offers three large pin Hi-Speed trigger products. These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference.The Geissele Service Spring SetThe Geissele...

Hi-Speed National Match Triggers - Large Pin Series Geissele Automatics currently offers three large pin Hi-Speed trigger products. These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference. The Geissele Service Trigger...

The HK MR 556 trigger is similar to our SSA with a 4.5 total pull weight. It can be used in both the HK 556 and semi-auto HK 416's Specifications Size: Standard Mil-Spec Pin Trigger Bow Type: M4 Curved Weapon Platform: HK MR556/762 (Upper Only) Type: 2 Stage 1st Stage Weight: 2.5 lbs. 2nd Stage Weight: 2.0 lbs. Total Pull Weight: 4.5 lbs. Adjustable: No Recommended Use: Law Enforcement, Home Defense, Hunting Pin Size: Mil-Spec All weights are approximates. Geissele Automatics two stage trigger...

The HK MR 762 trigger is similar to our SSA with a 4.5 total pull weight. It can be used in both the HK 762 and semi-auto HK 417's. Specifications Size: Standard Mil-Spec Pin Trigger Bow Type: M4 Curved Weapon Platform: HK MR556/762 (Upper Only) Type: 2 Stage 1st Stage Weight: 2.5 lbs. 2nd Stage Weight: 2.0 lbs. Total Pull Weight: 4.5 lbs. Adjustable: No Recommended Use: Law Enforcement, Home Defense, Hunting Pin Size: Mil-Spec All weights are approximates. Geissele Automatics two stage...

What It Does Coupled with our Apex Fully Machined Sear and Apex Ultimate Striker Block, the Apex M&P Competition Spring Kit will further reduce trigger weight by approximately 2.0 lbs. (based on a starting trigger pull weight of 7.0 to 8.0 lbs.). Whether your game is IDPA, USPSA or Steel Challenge, our Competition Spring Kit will withstand the rigors of high speed competition. Our competition striker spring and trigger return spring are shot peened to extend service life. This kit is...