Suppressors

The SureFire Ryder? 22-A is an ultra-lightweight suppressor optimized for .22 caliber rimfire pistols and rifles. Built to exacting standards like our Fast-Attach? suppressors for centerfire calibers, the Ryder 22-A features a patented aerospace aluminum body with rounded ends and flutes to reduce weight with no sacrifice in strength, and is coated with a tough Mil-Spec hard-anodized black finish that resists scratches, abrasion, and corrosion. At just over three ounces in weight and only 5.4...

We are proud to participate in SureFire's Qualified Professional Program which offers many popular SureFire products at significant discounts to eligible customers Eligible customers are: Military : Active, Reserve, NG, Retired, Medically Retired, and Service-connected Disabled Veterans Law Enforcement : Federal, State, and Local Active or Retired Sworn Officers Corrections Officers including Parole and Probation Officers First Responders with current credentials or official documentation...

The SOCOM300 SPS Fast-Attach? suppressor boasts the ultimate sound suppression of any .30 caliber suppressor ever built. This best-in-class suppressor is able to achieve unprecedented levels of sound attenuation, with 300 Black Out?subsonic and supersonic?as well as .308 and 300 Win Mag ammunition, thanks to its expertly designed baffles. This versatile suppressor is also very effective in suppressing the 5.56 mm round. The lightweight SOCOM300 SPS is constructed of Inconel, an advanced...

The all-titanium SureFire SOCOM338-Ti Fast-Attach? suppressor is optimized for .338 Lapua sniper rifles. This ultra-light, combat-ready suppressor is constructed from the highest-quality titanium?one of the world?s lightest and strongest materials?and is designed and manufactured with extreme tolerances to ensure accuracy and meet the demands of a precision sniper. It features the same cutting-edge technology and design as SureFire?s SOCOM556-RC and SOCOM762-RC suppressors, which were selected...

The SOCOM556-MINI2 Fast-Attach? suppressor is shorter, lighter version of SureFire?s SOCOM556-RC, the most advanced 5.56 mm rifle suppressor ever made. The full-length version was selected by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in history, which covered all aspects of suppressor performance, and also received the USSOCOM official safety verification in support of fielding. With an overall length of just 5 inches,...

The new and improved SureFire SOCOM556-RC2 Fast-Attach? suppressor is the most advanced 5.56 mm rifle suppressor ever made. Compact and lightweight, this suppressor was selected for the Mk18 and M4 by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in history. This test covered all aspects of suppressor performance, and SureFire beat every other entry. It has also received the USSOCOM official safety verification in support...

The new compact and lightweight SureFire SOCOM556-SB2 Fast-Attach? suppressor is designed specifically for 5.56 rifles with barrels shorter than 10 inches, or longer barrels firing unstable ammunition (e.g. most unjacketed frangible and ?green? ammunition). It is a modified version of the SOCOM556RC, the most advanced 5.56 rifle suppressor ever made, which was selected by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in...

The SureFire SOCOM762-MINI2 Fast-Attach? suppressor is optimized for use with 7.62x39 and 7.62x35 caliber rifles and will also adequately suppress 7.62x51 NATO caliber rifles with a barrel length of 16 inches or longer. It features new revolutionary suppressor technology based off SureFire SOCOM556-RC, the most advanced suppressor ever made, which was recently selected by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in...

SureFire?s new SOCOM762-RC2 Fast-Attach? suppressor represents a revolutionary breakthrough for attenuating the signature of 7.62 rifles, including those chambered for high-intensity magnum calibers. This compact and lightweight suppressor?mounted to the Mk 3 sniper rifle in .300 Win Mag or a M40A5 in .308 is a perfect weapon system. In fact the original SOCOM762-RC won?recently won the Mk13 contract award with US Special Operations Command in the most extensive suppressor evaluation in...

The SRD338Ti-QD is a Grade 5 titanium suppressor using fast-attach muzzle devices to attach the suppressor to the rifle. The rear mount of the suppressor has wrench flats to torque the suppressor to the muzzle device. There is a secondary retention latch that is depressed to remove the suppressor from the mount. The SRD338Ti-QD is rated up to the 338 Lapua Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be...

The SRD45 .45AUTO pistol suppressor features a Grade 9 titanium tube and 17-4PH stainless steel baffles allowing for light weight and durability. The SRD45 features a booster for use with Browning Tilting Barrel type pistols. A fixed barrel spacer is also available for use with fixed-barrel hosts like the SIG MPX. The SRD45 ships with both .578-28tpi and M16x1mm LH pistons. The SRD45 can be converted to use with 9mm or .40AUTO host pistols by using the appropriate threaded accessory piston....

The SRD556 is an Inconel 718 direct thread suppressor. Inconel 718, a nickel alloy stainless steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The 1/2x28tpi threads match the vast majority of modern rifles in .223/5.56mm on the market today. The rear mount has wrench flats to torque the suppressor to the barrel. These wrench flats can be used as a location to "pin and weld" the suppressor to make a shorter barrel over 16" in...

The SRD556-QD is an Inconel 718 suppressor using fast-attach muzzle devices to mount the suppressor to the rifle. Inconel 718, a nickel alloy stainless steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. This 5.56mm suppressor comes with a muzzle brake threaded in 1/2"x28tpi to match the vast majority of modern rifles in .223/5.56 on the market today. The rear mount has wrench flats to torque the suppressor to the muzzle device....

The SRD762 is an Inconel 718 direct thread suppressor. Inconel 718, a nickel alloy stainless steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The 5/8"-24tpi threads match the vast majority of modern sporting rifles in .308/762/300BLK on the market today. The rear mount has wrench flats to torque the suppressor to the barrel. These wrench flats can be used as a location to "pin and weld" the suppressor to make a shorter barrel...

The SRD762-QD is an Inconel 718 suppressor using fast-attach muzzle devices to attach the suppressor to the rifle. Inconel 718, a nickel alloy stainless steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. This 7.62mm suppressor comes with a muzzle brake threaded in 5/8"-24tpi to match the vast majority of modern rifles in .308/7.62/300BLK on the market today. The rear mount has wrench flats to torque the suppressor to the muzzle...

The SRD762Ti is a Grade 5 titanium direct thread suppressor. The 5/8"-24tpi threads match the vast majority of modern sporting rifles in .308/762/300BLK on the market today. The rear mount has wrench flats to torque the suppressor to the barrel. These wrench flats can be used as a location to "pin and weld" the suppressor to make a shorter barrel over 16" in total length. The SRD762Ti is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter,...

The SRD762Ti-QD is a Grade 5 titanium suppressor using fast-attach muzzle devices to attach the suppressor to the rifle. This 7.62mm suppressor comes with a muzzle brake threaded in 5/8"-24tpi to match the vast majority of modern rifles in .308/7.62/300BLK on the market today. The rear mount has wrench flats to torque the suppressor to the muzzle device. There is a secondary retention latch that is depressed to remove the suppressor from the mount. The SRD762Ti-QD is rated up to 300 Win Mag...

The SRD9 9mm pistol suppressor features a Grade 9 titanium tube and 17-4PH stainless steel baffles allowing for light weight and durability. The SRD9 features a booster for use with Browning Tilting Barrel type pistols. A fixed barrel spacer is also available for use with fixed-barrel hosts like the SIG MPX. The SRD9 ships with both 1/2"x 28tpi and M13.5x1mm LH pistons. Order Details Not available where prohibited by law Proof of eligibility is required and we will keep a copy of the...