Grips & Stops

Beretta APX Grip Frame , it's sold with two additional back straps: thin and large size. Unique modular chassis system allows replacement, reconfiguration, size tailoring, including: Different sizes Different color grip frames Customization of the frame without destroying the gun (stippling) OPERATOR BENEFIT Ability to easily customize your APX; modifications like ?stippling? become less risky thanks to an easily-interchangeable frame. The break-down of the gun in its basic subcomponents also...

The THenar was designed to enhance the operators ability to consistently place their grip in the same location. Additionally, the THenar incorporates a quick detach sling swivel mount, reducing the number of accessories on your rail. Doing more with less, enhancing target engagement time, while increasing weapon control, the THenar will dramatically improve your shooting performance. THenar picatinny comes with one THenar, Instructions, Bridge and screw. THenar MLOK version comes with one...

Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. Made in U.S.A. E.A.R. Export...

The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon...

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is " shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its...

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooters hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other...

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

Product DetailsInternal core unit for the MIAD as well as the MOE, MOE+, MOE-K2, and MOE AK Grips designed to hold two (2) AA type batteries in a self contained, water resistant unit. Included internal spacer provides rattle free storage of either (2) AAA or (2) N size batteries (commonly used for EOTech sights). Rubber cap has two sides with marking to identify "spent" batteries and can be opened with a push of the thumb.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

Product DetailsInternal core unit for the MIAD as well as the MOE and MOE-K2 Grips* designed to hold one (1) standard AR15/M4 complete bolt and firing pin.Made in U.S.A. E.A.R.Export Administration Regulations Controlled Product

Internal core unit for the MIAD as well as the MOE, MOE-K2, and MOE AK Grips* designed to hold two (2) CR123A lithium type, AA or AAA batteries, a bolt and firing pin or lubricant bottle in a self contained, water resistant unit. Rubber cap is captured to the unit and can be opened with a push of the thumb. E.A.R. Export Administration Regulations Controlled Product

Product DetailsCreated as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with...

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing. Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size...

A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control. With a one-piece reinforced polymer construction and compatibility with Magpul Grip Cores for storage customization, this MOE grip provides a welcome addition to the iconic AK platform. Made in U.S.A. Grip counts as one US compliance part for 922(r). FEATURES Drop-in upgrade for AK47/AK74 pistol grips* Fits both milled and...

The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. A drop-in upgrade for AK-pattern pistol grips, the MOE AK+ Grip is designed to improve ergonomics and weapon control, and borrows the rubber overmolded surface of the popular MOE+ AR15/M4 grip to ensure a positive and comfortable hold on the weapon. Compatible with Magpul Grip Cores for storage customization. Made in U.S.A. Grip...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip...

BIGGER SIZE SUPPORTS LARGER GRIP NEEDS Approximately 25% larger than MOE-K2 Grip More vertical angle provides optimal hand position for modern shooting techniques BEAVERTAIL BACKSTRAP FOR ENHANCED ERGONOMICS Design supports proper trigger finger placement STORAGE CORE CAPABILITY ACCEPTS PROPRIETARY XL GRIP CAP AND OIL BOTTLE GRIP CORE Not compatible with current grip cores ITAR International Traffic in Arms Regulations Controlled Product ...

Designed for use with MOE Hand Guards and Forends, the MVG is a basic, light weight, cost-effective vertical fore grip that attaches directly to these hand guards without any rail needed. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul Dynamics.SM. All mounting hardware included. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

Designed for use with MOE Hand Guards and Forends, the MVG is a basic, light weight, cost-effective vertical fore grip that attaches directly to these hand guards without any rail needed. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul Dynamics.SM. All mounting hardware included. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

Product DetailsThe MOE SL AK Grip (MOE Slim Line) is a drop-in upgrade for AK47/AK74 pistol grips with a more vertical angle optimized for these shorter LOP weapons that bring the primary hand in closer to the shooter's body.With an aggressive TSP texture for positive weapon control along with modern ergonomics, the MOE SL AK Grip provides a slightly smaller size and slimline feel compared to our full size grips.Made in U.S.A. Grip counts as one US compliance part for 922r.FEATURESDrop-in...

Similar to the MOE-K2, the MOE SL Grip (MOE Slim Line) is a drop-in upgrade for AR15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control along with excellent ergonomics, the SL Grip provides a slightly smaller size and slimline feel. All mounting hardware included. Made in U.S.A. FEATURES Replacement for AR15/M4 pistol-grip* More vertical grip...

The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included. Made in U.S.A. FEATURES: Replacement for...

Product DetailsSimilar to the MOE SL, the MOE-K2 AK Grip is a drop-in upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle improves comfort and control on these shorter LOP rifles that bring the primary hand in closer to the shooter's body.With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger...

Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique...

The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the...

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. Made in U.S.A. E.A.R. Export Administration Regulations Controlled...

Each set comes with (4) two-piece panels which will cover ONE side of a carbine rail. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel. Designed to function with compact and sub-compact slide. Attention: Not designed for the full-size P320. Will not cover the full-size dust cover leaving the recoil spring and guiderod exposed. Please Note - The X-Series Grip Modules will not work with magazines...

Will fit any 226 that is DA/SACut for decocker

Features of Sig Sauer P320 X-Compact Grip Module for 9mm, .40 Auto, .357SIG: Install your SIG P320 firing control unit into this Grip Module Assembly to convert to a P320 X-Series Carry chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel. Please Note - The X-Series Grip Modules will not work with magazines that have SIG SAUER on the baseplate. They are compatible with the baseplates that have the SIG Mark on it. ...

Color:BlackGun Make:Sig SauerGun Model:P365-XMacro

A pistol that doesn't shift in your hand and fits well, will help you be a more effective shooter. Use this laser-stippled P365XL grip module if you find the standard grip to be too smooth.For use on P365XL 9MM pistols. Material: PolymerColor: Black