Apex Tactical Specialties

When properly installed, this drop-in trigger will: – Reduce trigger pull weight to 5.0 to 5.5 lbs after break-in period – Smooth uptake and reset – Reduce trigger overall travel and reset distance – Deliver a crisp trigger break – Directly replaces factory components without additional fitting – Maintains factory safety values

What It Does The Apex Duty/Carry Kit for the M&P Shield was designed to provide the Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter (based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. However, armorer or gunsmith installation of the Ultimate Striker Block (USB) into...

What It Does Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber, the Apex Flat-Faced Forward Set Sear & Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. Expected Results Trigger pull weight between the 3lb (silver spring) and 4lb (green spring) mark (Dependent on trigger return spring installed) Smooth...

What It Does The Apex Competition Action Enhancement Kit for the M&P 45 was designed for the action shooting sports competitor. Our drop in kit will reduce trigger weight by approximately 4.0 lbs. (based on a starting trigger pull weight of 7.0 to 8.0 lbs.) Whether the game is IDPA, USPSA or Steel Challenge, our Competition Action Enhancement Kit will withstand the rigors of high speed competition. Our competition striker spring and trigger return spring are shot peened to extend service life....

What It Does The Apex Duty/Carry Action Enhancement Kit is engineered to provide the M&P 45 pistol owner a smooth, consistent 5.0 to 5.5 lbs. trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. The kit itself is designed to be drop-in and should not require further gunsmithing, however, armorer or gunsmith installation is recommended. Expected...

What It Does Coupled with our Apex Fully Machined Sear and Apex Ultimate Striker Block, the Apex M&P Competition Spring Kit will further reduce trigger weight by approximately 2.0 lbs. (based on a starting trigger pull weight of 7.0 to 8.0 lbs.). Whether your game is IDPA, USPSA or Steel Challenge, our Competition Spring Kit will withstand the rigors of high speed competition. Our competition striker spring and trigger return spring are shot peened to extend service life. This kit is...

What It Does The patented Apex Reset Assist Mechanism (U.S. Patent No. 8,510,980) is a drop in part engineered to improve tactile trigger reset of the M&P pistol. The RAM is precision machined and heat treated to Apex?s rigid quality control specifications with the utmost durability and longevity in mind. Expected Results Improves tactile trigger reset of the M&P pistol Serves as a failsafe in the unlikely event of a Trigger Return Spring breakage; keeping the trigger bar properly positioned...

What It Does The Apex M&P Competition Action Enhancement Kit was designed for the action shooting sports competitor. Our drop in kit will reduce trigger weight by approximately 4.0 lbs. (based on a starting trigger pull weight of 7.0 to 8.0 lbs.) Whether the game is IDPA, USPSA or Steel Challenge, our Competition Action Enhancement Kit will withstand the rigors of high speed competition. Our competition striker spring and trigger return spring are shot peened to extend service life. The kit...

What It Does The Apex Duty/Carry Action Enhancement Kit is engineered to provide the M&P (9mm, .357Sig & .40S&W only) pistol owner a smooth, consistent 5.0 to 5.5 lbs. trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. The kit itself is designed to be drop-in and should not require further gunsmithing, however, armorer or gunsmith...

What It Does The Apex Action Enhancement Trigger Kit for the M&P Shield (9/40 only) directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces Trigger pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face....

What It Does This kit is a combination of the Apex Duty/Carry Kit for the M&P Shield (9/40 only) and the Apex Action Enhancement Trigger for the M&P Shield (9/40 only). The Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety that maintains factory safety values.The Apex Duty/Carry Kit was designed to provide the M&P Shield pistol...

What It Does The Apex Action Enhancement Trigger Kit for the M&P Shield 45 directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces trigger pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The Apex...

What It Does This kit is a combination of the Apex Duty/Carry Kit for the M&P Shield (9/40 only) and the Apex Action Enhancement Trigger for the M&P Shield (9/40 only). The Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety that maintains factory safety values.The Apex Duty/Carry Kit was designed to provide the M&P Shield pistol...

What It Does The M2.0 Shield Action Enhancement Trigger directly replaces the factory hinged trigger with an anodized solid aluminum trigger body featuring a center mounted pivoting safety. The trigger reduces pre-travel and over-travel by approximately 20%. The M2.0 Shield Action Enhancement Trigger is perfect for use with the M&P M2.0 Shield already equipped with the Apex Shield Duty/Carry Kit. It can also be used as a stand-alone with the factory sear and other components. Expected Results...

What It Does The M2.0 Shield Action Enhancement Trigger directly replaces the factory hinged trigger with an anodized solid aluminum trigger body featuring a center mounted pivoting safety. The trigger reduces pre-travel and over-travel by approximately 20%. The M2.0 Shield Action Enhancement Trigger is perfect for use with the M&P M2.0 Shield already equipped with the Apex Shield Duty/Carry Kit. It can also be used as a stand-alone with the factory sear and other components. Expected Results...

What It Does Apex 1-Dot Fully Machined Sear: Reduces trigger pull weight and reduces over travel. Apex M2.0 Shield Duty/Carry Spring Kit: The Trigger return spring sets the trigger pull weight into the 5-5.5lb. range; Striker Block Spring provides a smooth uptake and reset; Sear Spring aids in returning the Sear to its ready to fire position and maintains trigger pull weight; Shield Slave Pin is used to hold tension on the trigger return spring during installation. Expected Results Reduces...

Expected Results Reduces trigger pull weight by approximately 2.0 lbs. from factory Smooths trigger pull Improves reset Applicable To What Gun(s) The Apex SD Spring Kit produces a smoother trigger pull and improved reset and is designed for Duty/Carry use. The kit works as a stand-alone or in conjunction with the Apex SD Polymer Action Enhancement Trigger. Works in conjunction with the Apex SD/Sigma Polymer Action Enhancement Trigger. NOT for use in the Sigma Series pistols (see Apex Sigma...

What It Does The Apex Optimized Grip for the CZ Scorpion EVO 3 S1 fits both the pistol and carbine, and optimized grip angle improves overall ergonomics when compared to the factory grip. Requires 3mm Allen wrench to install. Expected Results Improves ergonomics Designed so trigger assembly can be removed without removing the grip Fits the CZ Scorpion EVO 3 S1 pistol and carbine Applicable To What Gun(s) Works with all CZ Scorpion EVO 3 S1 pistols and carbines. In The Package 1 ea. Apex...

What It Does The Apex Low Profile Safety Lever Set for the CZ Scorpion EVO 3 S1 fits both the pistol and carbine, and is compatible with the CZ folding stock. The Safety Levers are made from 6061 aluminum, hardcoat anodized black, with a machined indicator line. Requires 1.5mm Allen wrench to install. Expected Results Direct drop-in replacement of factory safety lever Machined indicator line on each lever Fits the CZ Scorpion EVO 3 S1 pistol Maintains factory safety values Applicable To What...

What It Does The Apex Ultimate Safety Plunger for Glock is designed for use in the Glock 9mm, .40 S&W, .357 Sig caliber pistols and will smooth out the trigger take-up when compared to the original factory component. The Ultimate Safety Plunger maintains proper safety function, even when timing has been adjusted through the installation of aftermarket trigger systems. Expected Results Smooths out the trigger take-up Maintains proper safety function Applicable To What Gun(s) Glock models 17,...

What It Does The Apex Performance Connector for Glock model pistols is designed for use in all Glock pistols (excluding the model 42 and 43) and will reduce the trigger pull weight by approximately 1 pound when compared to the original factory component. The Apex Performance Connector is also available as part the Apex Action Enhancement Kit for Glock pistols. Expected Results Reduces trigger pull weight by approximately 1 lb. Direct replacement of standard factory connector Applicable To What...

What Is Does The Action Enhancement Trigger is a direct drop-in replacement of the factory polymer trigger and reduces pre-travel, overall trigger travel and trigger reset, provides a smooth uptake and reset while delivering a crisp trigger break. Expected Results Direct drop-in replacement of factory polymer trigger. Smooths uptake and reset Reduces trigger pre-travel, overall travel and reset distance Crisp trigger break Center mounted pivoting safety maintains factory safety values...

What It Does The Action Enhancement Kit for Glock pistols features the Apex Action Enhancement Purple Trigger, with Gen 3 Factory Trigger Bar, Apex Ultimate Safety Plunger for Glock and Apex Performance Connector. The kit is a direct drop-in replacement of the factory polymer trigger, safety plunger and connector and provides for a smoother trigger pull with reduced travel, reduced reset, a crisp break and approximately a 1 lb. reduction in trigger pull weight. Expected Results Direct drop-in...

What Is Does The Glock Action Enhancement Trigger is a direct drop-in replacement of the factory polymer trigger of the Gen 5 Glock 17 and Glock 19 pistols and reduces pre-travel, overall trigger travel and trigger reset, provides a smooth uptake and reset while delivering a crisp trigger break. The Performance Connector for Glock pistols reduces the factory trigger pull weight by approximately one pound. Expected Results Direct drop-in replacement of factory polymer trigger and connector...