What It Does
This kit is a combination of the Apex Duty/Carry Kit for the M&P Shield (9/40 only) and the Apex Action Enhancement Trigger for the M&P Shield (9/40 only). The Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety that maintains factory safety values.
The Apex Duty/Carry Kit was designed to provide the M&P Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter (based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset. However, armorer or gunsmith installation of the Ultimate Striker Block (USB) into the Shield slide is strongly recommended**.
- Reduces trigger pull by approximately 2 lbs.
- Smooth uptake and reset
- Reduces pre-travel
- Reduces over-travel
- Reduced reset
- Center mounted pivoting safety maintains factory safety values
Applicable To What Gun(s)
- Works with all Smith & Wesson M&P Shield Pistols in 9mm and .40 calibers. NOT for use in the Shield 45.
In The Package
- 1 ea. Aluminum Action Enhancement Trigger for M&P Shield
- 1 ea. Trigger Return Spring Installation Shield Slave Pin (to assist with trigger return spring installation)
- 1 ea. Fully machined .45 Sear
- 1 ea. Ultimate Striker Block Kit (Ultimate Striker Block, Striker Block Spring, Talon Tactical Tool)
- 1 ea. Shield Carry Spring Set
- 1 ea. Sear Spring (1/8")
- 1 ea. Trigger Return Spring
**The Shield sight removal in order to install the USB Kit is extremely difficult. Removal requires delicate precision so as not to damage the sights or slide. We highly recommend having a competent gunsmith perform this task.
You may need to make an adjustment to the trigger bar loop for proper function.