Utility

The Model 7334 AccuMold® Open Handcuff Case features a pull through style for easy access to the cuffs. Made of AccuMold® trilaminate construction with ballistic weave exterior and Coptex™ lining. A dual web belt loop design conveniently accommodates both 2 in. (50 mm) and 2.25 in. (58 mm) belts widths.

Mounts to any S.T.R.I.K.E.or PALS/MOLLE platform by weaving the integral straps on the back of the pouch in and out of the platform webbing. Constructed of 500 denier nylon (solid colors) or 500 denier CORDURA nylon (MultiCam).

The BDS Tactical super admin pouch combines the carrying capacity of a zippered general purpose pouch with the organizing ability of an admin pouch. The main zippered compartment dimensions are 8x6x2.5. Inside the main compartment against the body is a D-Ring is sewn in for dummy cording. Away from the body on the inside are two 5x4x1 pockets for storing larger items like handheld GPS or compass. On the front of the Super Admin Pouch is an adjustable multi-purpose pouch to fit multi tools,...

BLACKHAWK! belt-mounted pouches can be mounted on a variety of belts up to 2.5 inches wide for maximum versatility.

BLACKHAWK! belt-mounted pouches can be mounted on a variety of belts up to 2 inches wide for maximum versatility.

As its name implies, the Boo Boo Pouch was designed to hold non-essential essentials. Killing bad guys, defending Freedom, slaying hordes of undead is serious work but sometimes a basic pouch is needed for other vital gear like a phone, chap-stick, snivel kit, earplugs, wallet or whatever smaller items may be needed. The lid is made from a single piece of ULTRAcomp laminate for a thinner, stronger, and more water resistant closure. The Boo Boo Pouch has two elastic loops inside to aid in...

The large Chem Agent Pouch is molded from durable CORDURA nylon for years of dependable daily use. It holds MK-IV pepper sprays or similar 7.5-inch canisters securely with its oversized flap closure.

The molded Chemical Agent Pouch for Mark 4 canisters has a polymer insert to prevent denting. Get light weight and all-day comfort with the classic look of plain leather. The proprietary 5-layer laminate with the integral polymer core means long-lasting service life.

The Chemlight Pocket is designed to give you quick access to your chemlights by adhering a pocket to your traditional uniform arm pocket. The Chemlight Pocket has a discrete appearance allowing the user to have access to their chemlights without drastically alterting the appearance of their uniform. In addition the Chemlight Pocket allows the user to still use the pocket on their uniform and adhere any patches needed. Please note the Chemlight Pocket is cut to the specifications of a Crye...

Traditional non-molded duty gear is constructed of durable, abrasion-resistant, easy-care CORDURA nylon. We’ve combined this exclusive four-layer laminate CORDURA nylon with waterproof closed-cell foam padding, flexible polymer reinforcement and 150 denier knit lining to give you years of service at a price that fits any budget. To complete the package, we’ve also incorporated sturdy injection-molded belt loops to fit duty belts up to 2.25” wide.

The Model 7900 AccuMold® Elite™ Covered Handcuff Case is made from a trilaminate construction with a synthetic leather-like finish. Will hold one pair of standard handcuffs with chrome, brass or hidden snap closure. Dual belt loop conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts.

Mounts to any S.T.R.I.K.E. or PALS/MOLLE platform using our innovative Speed Clips, the quickest, strongest and most convenient modular attachment system on the market—allowing you to quickly mount, disconnect and rearrange your gear with ease. Our Speed Cli™ 3800 Series pouches are constructed of 1000 denier nylon.

The Expandable Baton Carrier is molded from durable CORDURA nylon for years of dependable daily use. It holds 21- to 26-inch expandable batons. The hole in back allows for the insertion of an opened baton. It can also hold Stinger and Stinger XT flashlights.

The dual snap design of this Single Handcuff Pouch allows the use of almost all handcuff styles and sizes. It fits new ASP chain and hinge handcuff designs.

This handcuff pouch will hold almost any brand of handcuff. Retention strap is adjustable in length. Also ideal for dip cans and other similar products.

Mounts to any S.T.R.I.K.E.® or PALS/MOLLE platform by weaving the integral straps on the back of the pouch in and out of the platform webbing. Constructed of 500 denier nylon.

The Model 24 Handcuff Case is a pull-through style with snap closure for linked and hinged cuffs. It features a belt loop that snaps for user convenience. Fits up to 1.75 in. (45 mm) belt loops. Constructed of premium, vegetable tanned full grain leather.

The Model 45 Mag/Cuff Pouch features an adjustable, non-slip paddle for various carry heights and angles. Made with premium grade full grain leather, the pouch provides an easy one-handed draw for an extra magazine and a pair of cuffs. Four sizes fit various magazines and the cuff pouch fits standard, oversized or hinged handcuffs.

The Model 7300 AccuMold® Covered Handcuff Case is made from a trilaminate construction with Coptex™ knit lining. Will hold one pair of standard handcuffs with hook and loop or hidden snap closure. Dual belt loop conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts.

The 7312 AccuMold® Expandable Baton Holder features a hole in the back for convenient reholstering of extended batons. Molded and contoured trilaminate construction with Coptex™ knit lining. Conveniently fits both 2 in. (50 mm) and 2.25 in. (58 mm). duty belts

The Model 7902 AccuMold® Elite™ Double Magazine Pouch is molded and contoured trilaminate construction with a leather-like finish. Features vertical or horizontal carry which offers versatility of use. Available in 2.25 in. (58 mm) belt widths.

The Model 7903 AccuMold® Elite™ Single Magazine/Knife Pouch features vertical carry with hidden snap closure. It is custom molded and contoured; pouch cavity expands both front and rear for a trim look. Available in dual belt loop design to conveniently fits both 2 in. (50 mm) and 2.25 in. (58 mm) duty belts.

The 7926 AccuMold® Elite™ Compact Light Holder is available in two sizes fitting Surefire® and Streamlight® models and similar. Will accommodate all flashlight lengths and fit most compact 1 in. diameter lights. Conveniently fits both 2 in. (50 mm) and 2.25 in. (58 mm) duty belts.

The Model 8000 PatrolTek Covered Handcuff Case is made from a trilaminate construction with 600-denier woven finish. Will hold one pair of standard handcuffs and utilizes a hidden snap closure. Dual belt loop conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts.

The Model 8016 PatrolTek Silent Key Holder holds standard key rings and features the exclusive Roll Top wraparound closure to hold keys securely and silently. Available in dual belt loop design to conveniently fits both 2 in. (50 mm) and 2.25 in. (58 mm) duty belts.

The PatrolTek Compact Light Holder is available in two sizes fitting Surefire and Streamlight models and similar. Will accommodate all flashlight lengths and fit most compact 1 in. diameter lights. Conveniently fits both 2 in. (50 mm) and 2.25 in. (58 mm). duty belts.

The 8028 PatrolTek Flat Glove Holder is slim and compact on the duty belt. Top flap is held closed with a hook and loop closure. Designed to hold two pairs of latex gloves and available with hook and loop or hidden snap closure, this holder conveniently fits both 2 in. (50 mm) and 2.25 in. (58 mm) duty belts.

Traditional non-molded duty gear is constructed of durable, abrasion-resistant, easy-care CORDURA nylon. We’ve combined this exclusive four-layer laminate CORDURA nylon with waterproof closed-cell foam padding, flexible polymer reinforcement and 150 denier knit lining to give you years of service at a price that fits any budget. To complete the package, we’ve also incorporated sturdy injection-molded belt loops to fit duty belts up to 2.25” wide.

Mounts to any S.T.R.I.K.E. or PALS/MOLLE platform by weaving the integral straps on the back of the pouch in and out of the platform webbing. Constructed of 500 denier nylon.

The BDS Tactical Gear Squad Leader Admin Pouch combines the carrying capacity of a zippered general purpose pouch with the organizing ability of an admin pouch.The pouch measures 7” h x 6” w x 3” d and comes with the following features. The Front of the pouch has 2 rows of PALS webbing and a 6" x 6" x 1" pocket that secures with a Lid with Loop to attach ID Patches & name tapes. The body-side inside panel includes 6 ink stick slots, and a 6” x 6” pocket with loop for dummy cording. The front...

Although our customers will find many uses for this pouch, it was designed for law enforcement officers who needed a TACO style solution for the X26 and X2. The rigid webbing sides allow it to expand while still providing a sturdy and stable shape to securely hold most stun gun models.Attaches to belts up to 2” with Velcro One-Wrap.

The BDS Tactical Enhanced Admin Pouch is one of our best selling admin pouches. This pouch fits perfectly on your bib of your plate carrier or chest rig. Mounts on any PALS / MOLLE platform with 4 across and 2 down. Against the body is a large 7x5 large flat pocket with a smaller 5x5 front flat pouch that closes with hook and loop. On the left of the pouch as you are wearing it there is a multitool / Pistol mag pouch with an adjustable lid and a revers pull tab for easy gripping. This pouch is...

Product Details Protect your eyewear on the job in this durable pouch designed to guard both your frames and lenses. A hard foam sleeve serves as a protective shell while the quick pull-out lens cloth keeps your lenses in optimal condition. Removable Hard Foam Sleeve A tough foam shell encapsulates and cushions your eyewear, preventing it from being crushed. Pull-Out Lens Cloth Integrated lens cleaning cloth ensures youll maintain clear vision. Short Main Zipper Opening With the shorter...

This ambidextrous cartridge holder easily attaches to the BLACKHAWK! TASER® X26 Duty Holster with side mount plate (sold separately) or on a duty belt.

The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed elastic when not in use. When needed, a simple pull on the bottom tab deploys a bag big enough to hold 10 M4 magazines. The stowed pouch design eliminates bulky bags flopping around posing as a snag hazard and is small enough to be mounted behind larger pouches or on duty belts. A cinch cord at the top of the bag can be closed with one...