Products 97-120 of 209
Show
Item #: MP MAG285-BLK -
The PMAG Minus 5 and 10 Round Limiters install in GEN M3 PMAG bodies, reducing the magazine capacity by five and ten rounds respectively. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body. Made in U.S.A. NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent...
Item #: MP MAG286-BLK -
The PMAG Minus 5 and 10 Round Limiters install in GEN M3 PMAG bodies, reducing the magazine capacity by five and ten rounds respectively. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body. Made in U.S.A. NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent...
Item #: MP MAG561-BLK -
The next-generation PMAG 20 GEN M3 is a 20-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a...
Item #: MP MAG562-BLK -
The PMAG Minus 5 Round Limiter installs in 10, 20, or 25 round 7.62x51 LR/SR GEN M3 PMAG bodies, reducing the magazine capacity by five rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body. NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG LR/SR GEN M3 magazines. This product does not constitute a permanent capacity...
Availability: Out Of Stock / Not Available For Back Orders
Item #: MP MAG563-BLK -
The PMAG Minus 10 Round Limiter installs in 10, 20, or 25 round 7.62x51 LR/SR GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body. NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG LR/SR GEN M3 magazines. This product does not constitute a permanent capacity...
Item #: MP MAG564-BLK -
ERGONOMIC Designed to improve ergonomics, adding positive control while protecting against impacts A BETTER FLOORPLATE The Ranger Plate brings many improvements to the standard floor plates found on 7.62x51 PMAG LR/SR GEN M3 PMAGsLEGENDARY MAGPUL POLYMER Designed to be as durable as the PMAG it's going on E.A.R. Export Administration Regulations Controlled Product EXPORT NOTICE: This is an item controlled for export by the Export Administration Regulations (EAR) under the Commerce Control List...
Item #: MP MAG566-BLK -
The AK MagLink is a coupler for PMAG AK magazines designed for Kalashnikov pattern rifles in 7.62x39mm which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The AK MagLink features a two-piece bolt on design and durable, lightweight reinforced polymer construction, which resists operational abuse. Wide-set, two-piece design resists flexing and integral grooves interface with PMAG ribbing...
Item #: MP MAG567-BLK -
The Magpul GL L-Plate fits the PMAG 17 GL9 and PMAG 15 GL9, and is made of durable reinforced polymer with a rubber overmold. Tailor made for competition or defensive use, the GL L-Plate is designed to aid in seating of the magazine into extended magazine wells and to provide positive traction and impact protection without unnecessary bulk. Available in packs of three, the GL L-Plate installs easily without tools in place of the original PMAG floor plate. Made in U.S.A. FEATURES: Designed for...
Item #: MP MAG569-BLK -
The Magpul Bolt Action Magazine Well 700L Magnum is a drop-in detachable box magazine solution for our Hunter 700L Stock. By simply removing your OEM bottom metal from the Hunter 700L, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting. Designed to work with AICS-pattern long action magazines, this kit also includes one Magpul PMAG 5 AC L, Magnum for .300WM based family of cartridges. Made in the USA. FEATURES Designed specifically for...
Item #: MP MAG595-BLK -
Features Fits second generation PMAG 30 and new PMAG 30 M3*Impact resistant polymer construction provides light weight and resists operational abuseWide-set, two-piece bolt on design resists flexingIntegral grooves interface with PMAG ribbing to eliminate slippage Specifications MagLink Magazine Coupler Weight: 2.8 oz. E.A.R. Export Administration Regulations Controlled Product ...
Item #: MP MAG698 -
Product DetailsThe PMAG 5 AC L, Magnum is a reliable and durable polymer magazine for .300 Winchester Magnum based family of cartridges and is compatible with long action AICS-spec bottom metal, to include the Bolt Action Magazine Well 700L for the Hunter 700L Stock. Built using M3 technology, this magazine is advanced in both material and manufacturing processes providing an economical, lightweight, durable and reliable single-stack bolt action magazine. Made in the USA. ITARInternational...
Availability: Out Of Stock / Not Available For Back Orders
When installed on the base of a 5.56x45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. Available in Black, FDE, Olive Drab Green, and Foliage. E.A.R. Export Administration...
Availability: Out Of Stock / Not Available For Back Orders
When installed on the base of a submachine-gun magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. 3 Pack of Magpuls for Subguns. Fits 9mm/.40S&W/.45ACP caliber subguns. Available in...
Availability: Out Of Stock / Not Available For Back Orders
The Magpul Ranger Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines that incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Magpul Ranger provides unsurpassed speed and controllability during high stress magazine changes. The loop made of pliable Santoprene overmolded onto a stainless steel plate. Patended design based upon the tried and true para-cord loops and duct-tape tabs currently in use...
Availability: Out Of Stock / Not Available For Back Orders
The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the aluminum USGI 30-round magazine black or green follower.Featuring a patent pending 4-way anti-tilt design for increased feeding reliability, the Enhanced Self-Leveling Follower is made from a non-hygroscopic and self-lubricating polymer.Made in the U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product
Availability: Out Of Stock / Not Available For Back Orders
Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Hunter 700L Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true drop-in solution for the end user*. The 700L is also M-LOK compatible to accept a broad range of accessories. Also compatible with our Bolt Action Magazine Well 700L which allows the rifle...
Availability: Out Of Stock / Not Available For Back Orders
The Magpul Pro 700 rifle chassis is an uncompromising, full featured precision rifle chassis for short action Remington 700 actions and other Remington 700 footprint actions. The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.Based on a...
Availability: Out Of Stock / Not Available For Back Orders
The Magpul Hunter X-22 chassis is an ergonomic, full-featured stock for the ubiquitous Ruger 10/22 rifle. Made from high quality reinforced polymer, the Hunter X-22 features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK slots for accessory attachment. The Hunter X-22 fits standard Ruger 10/22 .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures...
Availability: Out Of Stock / Not Available For Back Orders
The Magpul Hunter X-22 Takedown chassis is an ergonomic, full-featured stock specifically designed for the Ruger 10/22 Takedown series of rifles. Made from high quality reinforced polymer, the Hunter X-22 Takedown features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK slots for accessory attachment. , The Hunter X-22 Takedown fits standard Ruger 10/22 Takedown .22 LR pattern...
Availability: Out Of Stock / Not Available For Back Orders
The Magpul X-22 Backpacker stock takes the function of our full-size Hunter X-22 Takedown, and pares it down for ease of storage and transportation. Made for the Ruger 10/22 Takedown rifle, the X-22 Backpacker offers a minimalist solution for the hunter or outdoorsman who wants to transport their rifle in an efficient, convenient package without compromising shooting performance. Constructed of a durable advanced polymer, the X-22 Backpacker features an ergonomic hand guard, optional QD sling...
Availability: Out Of Stock / Not Available For Back Orders
The MOE X-22 fits standard Ruger 10/22 .22 LR pattern rifles and comes with two different diameter barrel trays to support both factory pencil and bull-barrel profiles to provide shooters with options for various configurations. Made in the USA. LIGHTWEIGHT BUT DURABLE POLYMER CONSTRUCTION Lightweight at a little over a pound Includes two M-LOK slots for accessory attachment Interchangeable barrel trays accept all factory barrels as well as aftermarket up to 0.920" diameter (12.5" minimum...
Availability: Out Of Stock / Not Available For Back Orders
The Magpul L-Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines that incorporates a rubberized pad. Bumper pad is made of durable Santoprene rubber overmolded onto a stainless steel plate. Bumper pad is made of durable Santoprene rubber overmolded onto a stainless steel plate. Made in the U.S.A. ITAR International Traffic in Arms Regulations Controlled Product.
Availability: Out Of Stock / Not Available For Back Orders
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Made in U.S.A. ITAR International Traffic in Arms Regulations Controlled Product
Availability: Out Of Stock / Not Available For Back Orders
Product DetailsSupplemental Impact/Dust Covers for the 5.56x45 PMAG 30 AR/M4 GEN M2 MOE, PMAG 20, and EMAG, designed to minimize debris intrusion and protect against potential cartridge damage during storage and transit.Made in U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product