Magpul

Product DetailsAmerican-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric...

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble...

The PMAG 10 GEN M3 is a 10-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Incorporating new material technology and manufacturing processes for enhanced strength, durability, and reliability, the PMAG 10 provides next-generation performance for those needing lower profile magazines. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK...

The next-generation PMAG 20 GEN M3 is a 20-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a...

The PMAG 30 AR/M4 GEN M2 MOE Window is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability. In addition, durable dual-side transparent windows allow...

The PMAG 30 AR/M4 GEN M2 MOEis a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI.It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.Magpul Original Equipment (MOE) is a line of firearm accessories...

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well as allowing for prone firing and easier...

The PMAG 30 AR 300 B GEN M3 is a purpose-designed magazine for rifles chambered in 300 Blackout. Since its inception, 300 Blackout shooters have had to use a magazine designed for another cartridge, limiting its ultimate performance and compatibility. One of the nice features of 300 Blackout is the compatibility with 5.56x45mm parts, but with the magazine it is a compromise to do so. Due to the wide variety of projectile weights and profiles potentially decreasing overall reliability, a...

The next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications. Modified internal and external geometry also permits operation with a wide range of non Colt-spec platforms such as the HK 416...

The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications. Modified internal and external geometry also permits operation with a wide range of non Colt-spec platforms such as the HK 416 and...

The PMAG 30 AR/M4 GEN M2 MOE Window is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability. Utilizing a high visibility indicator coil on the spring...

The PMAG 10/30 includes other features found throughout the GEN M3 line. Its redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the PMAG 10/30 in all environments, and a paint pen dot matrix located at the bottom panel of the body allows for easy marking for...

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well as allowing for prone firing and easier...

In addition to the performance gained by a dedicated mag, the PMAG 20 AR 300 B also offers a safer way to feed your 300 BLK rifle. When using 5.56x45mm mags, the potential to chamber and fire a 300 BLK round in a 5.56x45mm rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 20 AR 300 B’s distinct ribbed design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous...

The YUGO Zhukov-S Stock's hinge block for fixed-stock Yugoslavian pattern rifles allows the user to replace their factory buttstock with this high quality folding polymer replacement. The hinge block mounts directly to the unique rear interface of Yugo pattern rifles with the included hardware providing a very robust fit. A no-compromise folding stock for the modern AK, the Zhukov-S Stock folds to the right, has adjustable comb height for optics use via optional cheek risers, is adjustable for...

The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. The Zhukov-S has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded...

Featuring the unique wedge block fitment of the Zhukov-S Stock, the MOE AK Stock provides internal storage,optimized QD sling swivel placement, a shock absorbing rubber butt-pad for positive placement, and user-selectable snap on Cheek Risers (sold separately.) Made in U.S.A. Stock counts as one US compliance part for 922(r). Magpul MOE AK STOCK FEATURES Mounts to most stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion* Minimum weight and bulk with...

A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control. With a one-piece reinforced polymer construction and compatibility with Magpul Grip Cores for storage customization, this MOE grip provides a welcome addition to the iconic AK platform. Made in U.S.A. Grip counts as one US compliance part for 922(r). FEATURES Drop-in upgrade for AK47/AK74 pistol grips* Fits both milled and...

The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. A drop-in upgrade for AK-pattern pistol grips, the MOE AK+ Grip is designed to improve ergonomics and weapon control, and borrows the rubber overmolded surface of the popular MOE+ AR15/M4 grip to ensure a positive and comfortable hold on the weapon. Compatible with Magpul Grip Cores for storage customization. Made in U.S.A. Grip...

Product DetailsThe MOE SL AK Grip (MOE Slim Line) is a drop-in upgrade for AK47/AK74 pistol grips with a more vertical angle optimized for these shorter LOP weapons that bring the primary hand in closer to the shooter's body.With an aggressive TSP texture for positive weapon control along with modern ergonomics, the MOE SL AK Grip provides a slightly smaller size and slimline feel compared to our full size grips.Made in U.S.A. Grip counts as one US compliance part for 922r.FEATURESDrop-in...

Product DetailsSimilar to the MOE SL, the MOE-K2 AK Grip is a drop-in upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle improves comfort and control on these shorter LOP rifles that bring the primary hand in closer to the shooter's body.With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger...

The Magpul Zhukov Hand Guard is a fully-featured AK forearm for the modern AK. The Zhukov Hand Guard casts aside traditional AK forearm shortcomings and offers an extended option for modern shooting techniques, an aluminum chassis for strength and heat dispersion, a comfortable injection molded exterior for superior ergonomics, and M-LOK slots for optimized accessory attachment. Compatible with the Ultimak gas tube rail for optics mounting, the Zhukov Hand Guard redefines functionality for the...

The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle. Made in U.S.A. Hand Guard counts as one US compliance part for 922(r). FEATURES Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards*...

The Magpul MOE AKM Hand Guard is a replacement for original stamped receiver AK-47/AKM/AK-74 pattern rifles with a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK mounting capability, and replacement gas tube cover, the MOE AKM Hand Guard is an upgrade to any AK pattern rifle. Made in U.S.A. Hand Guard counts as one US compliance part for 922(r). FEATURES Optimized design replaces original stamped receiver AK-47/AKM/AK-74...