Magpul

The MOE SL Stock Commercial-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions. Made in U.S.A. FEATURES: Mounts on commercial-spec sized carbine receiver extension tube (not included) from...

The PRS Extended Rubber Buttpad, 0.80" replaces the standard rubber buttpad, adding approximately 0.50" to the original length of pull. Compatible with PRS AR15/M16 and AR10/SR25 models as well as the MOE Rifle Stock and MOE Fixed Carbine Stock. Mounts with existing hardware. Made in U.S.A.>br> E.A.R. Export Administration Regulations Controlled Product

The Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please...

 DEPENDABLE AR STOCK Mounts on Com-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others SECURE FIT Premium chrome-silicon lock spring provides positive locking and long service life THE RIGHT BALANCE OF CHEEK WELD AND COMFORT Sloping cheek weld combines a slim profile with user comfort SET IT AND FORGET IT Shielded release latch prevents snagging and accidental operation IMPACT MITIGATION Removable 0.55" Extended...

The MOE Stock Commercial-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most...

The Magpul M-LOK to MOE Adapter Kit is designed specifically to adapt many M-LOK compatible accessories to legacy MOE Hand Guards and Forends. The M-LOK to MOE adapter plates are customizable to length by snapping sections off at the pre-determined locations which help ensure a near seamless installation. Adapter plates of various sizes and all replacement hardware are included. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

The Magpul Bolt Action Magazine Well 700L Standard is a drop-in detachable box magazine solution for our Hunter 700L Stock. By simply removing your OEM bottom metal from the Hunter 700L, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting. Designed to work with AICS-pattern long action magazines, this kit also includes one Magpul PMAG 5 AC L, Standard for .30-06 based family of cartridges. Made in the USA. FEATURES Designed specifically...

The Magpul Bolt Action Magazine Well is a drop-in solution for our Remington 700 Hunter Stock for those that are wishing to add detachable box magazine capabilities to their rifle. By simply removing your OEM bottom metal and our spacer from the Hunter 700 Stock, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting from gunsmiths. Designed to work with AICS pattern, short action magazines. This kit also includes one Magpul PMAG 5 7.62 AC....

Product DetailsThe Forward Sling Mount is a sling attachment point for the Remington 870 and Mossberg 500/590/Maverick series of shotguns which clamps onto the barrel and extended magazine tube. It can be configured for use with either Push-Button QD Sling Swivels or one-point clip-in style attachments such as the MS3 Paraclip, the HK hook, ITW MASH hook, and others. Made from precision cast steel that is Melonite treated for wear and corrosion resistance. Dedicated fit for the Remington 870...

Product DetailsBuilding on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.The MBUS Pro Offset Front Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less...

Product DetailsBuilding on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.The MBUS Pro Offset Rear Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less...

Product DetailsThe new MBUS Pro LR capitalizes on the low profile and sleek styling of the original MBUS Pro, while adding the additional feature of an elevation adjustment wheel to accurately engage targets at variable distances.Built with all steel construction, this is the sighting solution that delivers no-tool adjustments, maximum strength, corrosion resistance, and functionality in a compact package. Positive detents keep the MBUS Pro LR at standard AR sight height when deployed and so...

Product DetailsThe MSA QD (MOE Sling Attachment QD) attaches directly to MOE Hand Guards and Forends, providing a forward sling attachment point for push-button QD slings such as the MS4 GEN 2. The MSA QD is made from Melonite finished steel for wear and corrosion resistance.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product

The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4...

Product DetailsAmerican-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric...

Product DetailsPush-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for two to one-point convertible sling.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product

Product DetailsThe Magpul QDM is a heavy-duty upgrade to standard push-button quick detach sling swivels. The innovative design allows for a lower profile sling swivel that offers one-handed manipulation, a high strength bale that rotates freely and canalizes sling webbing to prevent rollover, and superior resistance to corrosion with a Melonite finish.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

The PMAG 17 GL9 is a 17-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 17rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The...

The PMAG 5 7.62 AC is a reliable and durable polymer magazine for .308 Winchester based family of cartridges and is compatible with short action AICS-spec bottom metal, to include the Bolt Action Magazine Well for the Hunter 700 Stock. Featuring GEN M3 technology, a paint-pen dot matrix for visual identification, and a flared base plate for positive control and ease of retrieval, the PMAG 5 7.62 AC sets a new standard for bolt action magazines. Comes standard as a 5-round capacity magazine for...

The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The...