Accessories

Recharge your electronics in a fraction of the time with this high-speed USB charger. Not your average charger, it offers two ultra-fast, 2-amp USB ports that each deliver 10 watts, charging your GEAR AID lights, phones or tablets in half the time of an average charger. It's equipped with folding AC wall and DC car plugs so you can recharge electronics on the go. Weighing just 2.4 ounces and measuring 2.25 inches square, it makes a great travel charger.

The CellVault protects batteries and other critical gear while keeping it accessible and organized. The integrated webbing clip allows you to access the CellVault’s contents without removing it, or you can quickly detach it for more control. The CellVault easily attaches to M.O.L.L.E., webbing, and straps, and features lanyard loops at both ends, for more attachment options. It features a slim vertical profile that utilizes less than 1 M.O.L.L.E. webbing column, giving you more room for other...

The CellVault XL is the large version of the CellVault. Like the original CellVault, it protects batteries and other critical gear while keeping it accessible and organized. The integrated webbing clip allows you to access the CellVault’s contents without removing it, or you can quickly detach it for more control. The CellVault XL has twice the capacity of the original CellVault, with a removable inner divider. The CellVault XL easily attaches to M.O.L.L.E., webbing, and straps, and features...

CLENS (pronounced “cleanse”) is a set of heat-resistant clear polymer circles that are cut to fit on a wide range of flashlight and weapon-light lenses. CLENS protects the lens from carbon and other debris that can build up from the use of lights during firearms training. CLENS can be removed to quickly clean a light, rather than having to apply Vaseline before shooting, replace a lens, or risk abrasion with lens cleaners. CLENS’ mild adhesive backing has a higher affinity for polymer than...

Use the Claw Light Mount by RAM to easily mount your GEAR AID LED Light on car racks, handlebars, canopies, table tops, seat backs and more. The clamp and rubber pads provide a firm hold to flat surfaces up to 1.14 inches, as well as rods and rails from 0.625 inches to 1.5 inches. In addition to a firm hold, the mount also features easy-to-use ball and socket technology that enables quick adjustments and infinite angles at the turn of a knob. It's made from high-strength and corrosion...

Use the Fixed Light Mount by RAM to easily mount your GEAR AID LED Light on any flat surface in your shop, shed, or home. In addition to a firm hold, the mount also features easy-to-use ball and socket technology that enables quick adjustments and infinite angles at the turn of a knob. It's compatible with GEAR AID LED lights as well as most digital cameras and camcorders. It's made from powder-coated, marine-grade aluminum. The base is pre-drilled with six holes, including four that match the...

Use the Magnetic Light Mount by RAM to easily mount your GEAR AID LED Light on cars, trucks, RVs, ATVs, motorcycles, tool chests, and more. In addition to a firm hold, the mount features easy-to-use ball and socket technology that enables quick adjustments and infinite angles at the turn of a knob. Compatible with GEAR AID LED lights and most digital cameras and camcorders, this mount is ideal for use when car camping, working on your car's engine, or when the power goes out. It's made from...

Use the GoPro Mount Adapter to easily mount your GEAR AID LED light and most digital cameras to any GoPro Mount (sold separately). The two-piece adapter is ideal for use with GEAR AID's FLUX, ARC, and SPARK lights. This system allows you to mount your light or camera to your car, boat, canopy, RV, handlebars, workbench, in your shed, or under the sink.

Use the RAM Mount Adapter to easily mount your GEAR AID LED light and most digital cameras to any 1-inch ball RAM Mount (sold separately). Easy to use, the ball and socket technology allows quick adjustments and infinite angles at the turn of a knob. Mount your light or camera to your car, boat, handlebars, workbench, in your shed, or under the sink.

The UE07 provides reliable remote activation for any Scout Light WeaponLight. Tailcap module screws onto Scout Light body. Switch, cable, and connector are an integral unit that plugs into the tailcap socket; other cable lengths are available (see ST-series switches). Pressure-activated switch attaches to firearm via adhesive-backed Velcro� pad. UE07 features 7 inch cable, which fits most rifle/carbine applications. Entire unit is O-ring sealed at both ends, weatherproof.

This flashlight has been engineered to meet a variety of hands-free task illumination requirements with various color LEDs operable at varying outputs and runtimes. The flashlight features a 185˚ tilting head and belt or web clip to allow positioning of the illumination source at the work area. C4? LED technology, white, impervious to shock with 50,000Hr lifetime. 5mm IR LED ? 880 nm peak wavelength, impervious to shock with 100,000 hour lifetime 5mm Red LED ? 630 nm peak wavelength,...

The SwitchBack 2.0 is the next evolution in the innovative SwitchBack Flashlight Ring product line, incorporating new features and refinements based on thousands of hours of use by our subject matter experts and customers. The SwitchBack 2.0 mounts between the tailcap and body of your flashlight, making it secure regardless of impact, moisture, and heat/cold changes. SwitchBacks can be used with handguns or long guns, allowing the user to:• Reliably deploy and index a flashlight from both...

The SwitchBack S Backup Flashlight Ring enhances your compact flashlight, optimizing ergonomics for searching and shooting. Securely mounts between the tailcap and body of the flashlight. Rigid retention ring helps reliably deploy and index flashlight from both pockets and pouches. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm,...