Parts & Maintenance

**PLEASE NOTE** This product IS NOT compatible with the P365X OR XL Grip Modules.

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel. Designed to function with compact and sub-compact slide. Attention: Not designed for the full-size P320. Will not cover the full-size dust cover leaving the recoil spring and guiderod exposed. Please Note - The X-Series Grip Modules will not work with magazines...

Will fit any 226 that is DA/SACut for decocker

Genuine replacement barrel for the 5.5" 5.56 nato Rattler. Complete with barrel and gas block assembly.. SIG SAUER offers upper assemblies and caliber exchange kits in various barrel lengths. All NFA rules apply to installation of these upper assemblies to lower receivers and caliber exchange kits to upper receivers. Upper assemblies and caliber exchange kits with barrel lengths less than 16 ?may only be affixed to lower receivers which (1) are not recorded as a rifle lower by the...

Factory replacement 10" aluminum handguard for the SIG MCX-SPEAR LT.

Factory replacement 10" aluminum handguard for the SIG MCX-SPEAR LT.

Adapts with any M4/AR15 Spec Lower AssemblyDual Rod Recoil Assembly Eliminates Buffer SystemM4 Adapter allows for Pic Rail Folding Stock CapabilitiesAdjustable Gas System for Suppressor OptimizationQuick Change Barrel Design allows to easily swap calibers and barrel lengthsGas Piston Design Reduces Part Exposure to Carbon FoulingDesigned to go 20k rounds before any part replacementsSLX/SLH Next Gen Suppressor Designed QD Flash Hider for Clutch-Lok AdaptabilityAmbidextrous Charging Handle with...

Adapts with any M4/AR15 Spec Lower AssemblyDual Rod Recoil Assembly Eliminates Buffer SystemM4 Adapter allows for Pic Rail Folding Stock CapabilitiesAdjustable Gas System for Suppressor OptimizationQuick Change Barrel Design allows to easily swap calibers and barrel lengthsGas Piston Design Reduces Part Exposure to Carbon FoulingDesigned to go 20k rounds before any part replacementsSLX/SLH Next Gen Suppressor Designed QD Flash Hider for Clutch-Lok AdaptabilityAmbidextrous Charging Handle with...

Thread pitch 1/2x28 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Thread pitch 1/2x28 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Thread pitch 1/2 x  28 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Thread pitch 5/8 in - 24 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Thread pitch 1/2 x  28 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Replace or upgrade your SIG MCX/MPX with this folding minimalist plus folding stock.

Add your favorite AR-15 stock to your MCX or MPX with this adapter.CAUTION: Many States and localities regulate the use and/or possession of collapsible and folding stocks. Use, or possession of this product in conjunction with certain other parts, may be illegal in some jurisdictions. It is YOUR responsibility to insure your use of this product is in compliance with all Federal, State, and local laws and regulations. ...

SIG SAUER cheek riser for the SIG MCX/MPX factory skeletonized stock. Includes: polymer cheek riser and locking insert.

Weight: .31lbs Height & Width:  2" tall and 1 3/4" wide

SKU8901630ModelP226Caliber9mm LugerColorBlackApplicationSelf-Defense, Target Shooting, Concealed Carry, Everyday Carry (EDC), Competition Shooting, Law Enforcement / Military, Tactical, RangeLoaded Chamber IndicatorNoBarrel IncludedNoRecoil Assembly IncludedNoBarrel Length (In)4.4SightsROMEO-X PRO w/ XRAY3 Day/Night SightsOptic ReadyYesRX FootprintPROElectro-Optic InstalledYesCenter Dot Size2 MOA Red Dot / 32 MOA CirclePistol SizeFull-SizeSlide FinishNitron®Slide MaterialStainless...

All the factory replacement corrosion-resistant parts to complete your P320 slide, minus barrel, sights, and recoil assembly. Includes: ExtractorExtractor PinExtractor springExtractor spring pinStriker group assemblyRear slide cap Installation of these parts kits requires disassembly of your firearm beyond a “field-stripped” condition. Improper installation may result in malfunction, serious injury, or death. SIG SAUER requires that only certified SIG SAUER armorers install these parts kits....

The SIG SAUER P320 skeletonized factory flat trigger is a direct replacement for your stock trigger. A 30% trigger pull weight reduction compared to the stock P320 trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull. Finish: Titanium-Nitride (Gold Color) Installation of these parts kits requires disassembly of your firearm beyond a “field-stripped” condition. Improper installation may result in...

Barrel Compatibility: 9MMFinish: Black *Note, only for use on 9mm/ .357SIG / .40S&W fire control units (FCU). It will not function with a .45 ACP FCU.

Included: Complete slide assembly, compensator, 4.6" threaded Gold barrel, and recoil assembly.Grip module compatibility: Full size both X-Series, and non-X-Series. Only for use on 9mm/.357SIG/.40S&W firing control units (FCU). It will not function with a .45ACP FCU.Optic ready compatibility: ROMEO1-PRO, ROMEO2, Delta Point Pro, and RMR (requires sealing plate) footprint.Holster compatibility: Fits P320 XFIVE holsters.Material: Stainless SteelFinish: Black Cerakote Slide and Compensator. Gold...