Products 1-25 of 25
Show
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SGAS-A4L-00BT-00 -
The Troy 0.750 Low-Profile Gas Block is made specifically for rifle barrels that have a 0.750 gas block seat. The low-profile design allows for clearance of most aftermarket rails that require a smaller gas block. Machined from 4140 pre-hardened steel finished with MIL-STD Manganese Phosphate. The Troy low profile gas block fits tightly to the barrel using two set screws. Gas tube roll pin not included. Available in Black.
Troy Industries
Troy Industries
Item #: TY SGAS-875-00BT-00 -
Troy?s .875 Low Profile Gas Block is made specifically for bull barrel rifles that have a 0.875 gas block seat and Armalite 0.308 heavy barrel and other calibers. Machined from 4140 pre-hardened steel finished with MIL-STD Manganese Phosphate. Gas tube roll pin not included. Available in Black.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SGAS-936-00BT-00 -
The Troy .936 Low Profile Gas Block is made specifically for bull barrel rifles that have a 0.936 gas block seat. The Troy .936 low profile gas block works on both .223, 5.56 and .308 bull barrels and other calibers. An option for users who desire to replace their default gas blocks, or fixed front sight gas blocks to utilize a free float rail system that installs over the gas block. Machined from 4140 pre-hardened steel finished with MIL-STD Manganese Phosphate. Gas tube roll pin not...
Troy Industries
Troy Industries
Item #: TY SGAS-2LP-00BT-00 -
The 2" Low Profile Gas Block is made to cover the area under the fixed sight gas block and hides taper pin holes. Machined from 4140 pre-hardened steel finished with MIL-STD Manganese Phosphate. Gas tube roll pin not included. Available in Black.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SRAI-BNT-0000-00 -
The Troy Standard AR15 Barrel Nut is a rugged alternative to standard barrel nuts. The TRX Barrel Nut is a proprietary barrel nut designed specifically for TRX BattleRails. Note: Will not work with the Alpha Rail.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY STRX-ELI-W0BT-00 -
The Troy Standard AR15 Barrel Nut is a rugged alternative to standard barrel nuts. The TRX Barrel Nut is a proprietary barrel nut designed specifically for TRX BattleRails. Note: Will not work with the Alpha Rail.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SGRI-VRT-A0BT-00 -
This front grip is your solution to a front grip that attaches to any MIL-STD Picatinny Rail without tools. The Troy CQB Vertical Grip attaches to any MIL-STD Picatinny Rail without tools featuring a waterproof storage compartment and aggressive ridged pattern for an enhanced grip rounds out this lightweight option for a vertical grip. Machined from billet aircraft aluminum and finished in hardcoat anodizing.
Troy Industries
Troy Industries
Item #: TY SGRI-TRG-A0BT-00 -
Don?t lose your grip when things get dirty. The Troy Modular Combat Grips offer versatility, unmatched durability and outstanding ergonomics in a grip that complements all Picatinny rail systems. Features Three part modular design. Waterproof high capacity storage compartment. Technical Specifications: Thumb screw sold separately. Grip converts easily into two sizes: 4 5/8? when completely assembled and 3 1/4? when in short mode. Available in Black and Flat Dark Earth. ...
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SGRI-TRG-A0FT-00 -
Don?t lose your grip when things get dirty. The Troy Modular Combat Grips offer versatility, unmatched durability and outstanding ergonomics in a grip that complements all Picatinny rail systems. Features Three part modular design. Waterproof high capacity storage compartment. Technical Specifications: Thumb screw sold separately. Grip converts easily into two sizes: 4 5/8? when completely assembled and 3 1/4? when in short mode. Available in Black and Flat Dark Earth. ...
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SMOU-PBS-00BT-01 -
The Q.D. 360 Push Button Sling Mount is a low-profile attachment for BattleRails with an ambidextrous quick detach swivel mount
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SMOU-PBS-00BT-00 -
The Q.D. 360 Push Button Sling Mount is a low-profile attachment for BattleRails with an ambidextrous quick detach swivel mount offered with a heavy duty 360 desgrees push button swivel. Available in Black.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SCOV-PCK-14BT-00 -
Troy Rail Covers easily slide onto a MIL-STD Picatinny Rail and locks into place with a built-in retaining clip and can be adjusted with a bullet tip; no tools required. Constructed from durable, heat and chemical-resistant synthetic polymer resin, each rail cover is scientifically engineered and proven to reduce heat transfer and hand abrasions. The Troy Rail Cover Package is a 12 piece set including: two 1.7?, two 2.6?, two 3.5?, two 4.4?, two 5.3? and two 6.2? covers. Patent Pending.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SCOV-BRC-34BT-00 -
Troy Rail Covers easily slide onto a MIL-STD Picatinny Rail and locks into place with a built-in retaining clip and can be adjusted with a bullet tip; no tools required. Constructed from durable, heat and chemical-resistant synthetic polymer resin, each rail cover is scientifically engineered and proven to reduce heat transfer and hand abrasions.
Troy Industries
Troy Industries
Item #: TY SCOV-BRC-34FT-00 -
Troy Rail Covers easily slide onto a MIL-STD Picatinny Rail and locks into place with a built-in retaining clip and can be adjusted with a bullet tip; no tools required. Constructed from durable, heat and chemical-resistant synthetic polymer resin, each rail cover is scientifically engineered and proven to reduce heat transfer and hand abrasions.
Troy Industries
Troy Industries
Item #: TY SCOV-BRC-04BT-00 -
Troy Rail Covers easily slide onto a MIL-STD Picatinny Rail and locks into place with a built-in retaining clip and can be adjusted with a bullet tip; no tools required. Constructed from durable, heat and chemical-resistant synthetic polymer resin, each rail cover is scientifically engineered and proven to reduce heat transfer and hand abrasions.
Troy Industries
Troy Industries
Item #: TY SCOV-BRC-36BT-00 -
Troy Rail Covers easily slide onto a MIL-STD Picatinny Rail and locks into place with a built-in retaining clip and can be adjusted with a bullet tip; no tools required. Constructed from durable, heat and chemical-resistant synthetic polymer resin, each rail cover is scientifically engineered and proven to reduce heat transfer and hand abrasions.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SCOV-BRC-36FT-00 -
Troy Rail Covers easily slide onto a MIL-STD Picatinny Rail and locks into place with a built-in retaining clip and can be adjusted with a bullet tip; no tools required. Constructed from durable, heat and chemical-resistant synthetic polymer resin, each rail cover is scientifically engineered and proven to reduce heat transfer and hand abrasions.
Troy Industries
Troy Industries
Item #: TY SCOV-BRC-06BT-00 -
Troy Rail Covers easily slide onto a MIL-STD Picatinny Rail and locks into place with a built-in retaining clip and can be adjusted with a bullet tip; no tools required. Constructed from durable, heat and chemical-resistant synthetic polymer resin, each rail cover is scientifically engineered and proven to reduce heat transfer and hand abrasions.
Troy Industries
Troy Industries
Item #: TY SSQD-7PK-00BT-00 -
This new revolutionary rail insert is made specifically for the Alpha, Delta, TRX Extreme rails and the T22 Sport Chassis. Its composition of proprietary advanced rubber makes it heat resistant and extremely durable. The 6-hole Squid Grip? inserts directly into the cooling holes, and may be cut to form any length or inserted end to end for longer lengths. Patent Pending. Will not fit the Troy/VTAC rail systems.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SSQD-7PK-00FT-00 -
This new revolutionary rail insert is made specifically for the Alpha, Delta, TRX Extreme rails and the T22 Sport Chassis. Its composition of proprietary advanced rubber makes it heat resistant and extremely durable. The 6-hole Squid Grip? inserts directly into the cooling holes, and may be cut to form any length or inserted end to end for longer lengths. Patent Pending. Will not fit the Troy/VTAC rail systems.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SSQD-M6P-00BT-00 -
TROY's patented, revolutionary rail insert is now available for M-LOK. Its composition of proprietary advanced rubber makes it heat resistant and extremely durable. The squid grips insert directly into the cooling holes, and may be cut to form any length or inserted end to end for longer lengths. Includes 6 rows of 3 Sections.
Troy Industries
Troy Industries
Item #: TY SSQD-M6P-00TT-00 -
TROY's patented, revolutionary rail insert is now available for M-LOK. Its composition of proprietary advanced rubber makes it heat resistant and extremely durable. The squid grips insert directly into the cooling holes, and may be cut to form any length or inserted end to end for longer lengths. Includes 6 rows of 3 Sections.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SMOU-SSQ-00BT-00 -
The S.S.Q.D. Swivel is a versatile, durable, heavy-duty stainless detachable swivel with a raised cup around the push button that prevents accidental release. Available in Black
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY STRX-STA-W0BT-00 -
The Troy TRX barrel wrench is designed to fit a variety of AR style rifles. Discontinued Item. Limited Quantities Available.
Troy Industries
Availability: Back Ordered
Troy Industries
Item #: TY SRAI-TRX-HERP-00 -
The Low Profile Q.D. Sling Mount is a low profile, lightweight and durable S.S.Q.D. sling mount solution for Alpha, Alpha .308 TRX Extreme, TRX .308 Rails and T-22 Sport Chassis. Not compatible with the Alpha Revolution Rail. Includes S.S.Q.D. Swivel. Available in Black.