Parts & Maintenance

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel. Designed to function with compact and sub-compact slide. Attention: Not designed for the full-size P320. Will not cover the full-size dust cover leaving the recoil spring and guiderod exposed. Please Note - The X-Series Grip Modules will not work with magazines...

Will fit any 226 that is DA/SACut for decocker

Genuine replacement barrel for the 5.5" 5.56 nato Rattler. Complete with barrel and gas block assembly.. SIG SAUER offers upper assemblies and caliber exchange kits in various barrel lengths. All NFA rules apply to installation of these upper assemblies to lower receivers and caliber exchange kits to upper receivers. Upper assemblies and caliber exchange kits with barrel lengths less than 16 ?may only be affixed to lower receivers which (1) are not recorded as a rifle lower by the...

Adapts with any M4/AR15 Spec Lower AssemblyDual Rod Recoil Assembly Eliminates Buffer SystemM4 Adapter allows for Pic Rail Folding Stock CapabilitiesAdjustable Gas System for Suppressor OptimizationQuick Change Barrel Design allows to easily swap calibers and barrel lengthsGas Piston Design Reduces Part Exposure to Carbon FoulingDesigned to go 20k rounds before any part replacementsSLX/SLH Next Gen Suppressor Designed QD Flash Hider for Clutch-Lok AdaptabilityAmbidextrous Charging Handle with...

Adapts with any M4/AR15 Spec Lower AssemblyDual Rod Recoil Assembly Eliminates Buffer SystemM4 Adapter allows for Pic Rail Folding Stock CapabilitiesAdjustable Gas System for Suppressor OptimizationQuick Change Barrel Design allows to easily swap calibers and barrel lengthsGas Piston Design Reduces Part Exposure to Carbon FoulingDesigned to go 20k rounds before any part replacementsSLX/SLH Next Gen Suppressor Designed QD Flash Hider for Clutch-Lok AdaptabilityAmbidextrous Charging Handle with...

Thread pitch 1/2x28 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Thread pitch 1/2x28 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Thread pitch 1/2 x  28 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Thread pitch 5/8 in - 24 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Thread pitch 1/2 x  28 Compatible with the following lowers: MCX, M400, 516, and any MIL-SPEC AR-15/M4.

Add your favorite AR-15 stock to your MCX or MPX with this adapter.CAUTION: Many States and localities regulate the use and/or possession of collapsible and folding stocks. Use, or possession of this product in conjunction with certain other parts, may be illegal in some jurisdictions. It is YOUR responsibility to insure your use of this product is in compliance with all Federal, State, and local laws and regulations. ...

SIG SAUER cheek riser for the SIG MCX/MPX factory skeletonized stock. Includes: polymer cheek riser and locking insert.

Weight: .31lbs Height & Width:  2" tall and 1 3/4" wide

The SIG SAUER P320 skeletonized factory flat trigger is a direct replacement for your stock trigger. A 30% trigger pull weight reduction compared to the stock P320 trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull. Finish: Titanium-Nitride (Gold Color) Installation of these parts kits requires disassembly of your firearm beyond a “field-stripped” condition. Improper installation may result in...

Features of Sig Sauer P320 X-Compact Grip Module for 9mm, .40 Auto, .357SIG: Install your SIG P320 firing control unit into this Grip Module Assembly to convert to a P320 X-Series Carry chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel. Please Note - The X-Series Grip Modules will not work with magazines that have SIG SAUER on the baseplate. They are compatible with the baseplates that have the SIG Mark on it. ...

The SIG SAUER P365/P365X/P365XL factory gold flat trigger is a direct replacement for your stock trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a more consistent pull. The Gold titanium-nitride finish not only looks good but also has increased lubricity which results in a smoother trigger feel. Installation of these parts kits requires disassembly of your firearm beyond a “field-stripped” condition. Improper installation may...

Color:BlackGun Make:Sig SauerGun Model:P365-XMacro

A pistol that doesn't shift in your hand and fits well, will help you be a more effective shooter. Use this laser-stippled P365XL grip module if you find the standard grip to be too smooth.For use on P365XL 9MM pistols. Material: PolymerColor: Black

The SIG SAUER P320 factory flat trigger is a direct replacement to your stock trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull.

The SIG SAUER P320 factory flat trigger is a direct replacement to your stock trigger. A 30% trigger pull weight reduction compared to the stock P320 trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull.

Requires complete P320 Fire Control Unit and X5 or Full-size slide assembly. TXG XSeries Full Grip Module (SIG 8900036, SIG 8900274) Grip Module overall weight is 13.3oz. With the weight and magwell (not included), the total weight of grip is 16.6oz. TXG XSeries Carry Grip Module (SIG 8900674)Overall weight on Carry Grip Module: 12.3 oz. *Please note: - This grip module DOES NOT includes the extended magwell and internal weight.- The X-Series Grip Modules will only fit new style magazines with...