Magpul

Products 1-48 of 210
Show
10 PMAGs With Maglula Loader mag571-blk, pmag, pmag571-blk,
Magpul
Retail: $159.45
Price: $110.00
View
Availability:

In Stock

Magpul Item #: MP MAG571 Maglula -

The PMAG 30 AR/M4 GEN M2 MOE Window is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability. Utilizing a high visibility indicator coil on the spring...

5.56 Polymer Dummy Rounds
Magpul
Retail: $6.95
Price: $5.63
View
Availability:

In Stock

Magpul Item #: MP MAG215-BLK -

    The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Made in U.S.A. ITAR International Traffic in Arms Regulations Controlled Product

    ACS Carbine Stocks  Commercial-Spec
    Magpul
    Retail: $89.95
    Price: $84.55
    View
    Availability: Out Of Stock / Not Available For Back Orders
    Magpul

    The Magpul ACS (Adaptable Carbine/Storage) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options.Similar to the Magpul CTR, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes...

    ACS Carbine Stocks  Mil-Spec
    Magpul
    Retail: $89.95
    Price: $84.55
    View
    Availability: Out Of Stock / Not Available For Back Orders
    Magpul

    The Magpul ACS (Adaptable Carbine/Storage) Mil-Spec Model is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. Similar to the Magpul CTR, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes excessive...

    ACS-L Carbine Stock - Commercial Model
    Magpul
    Retail: $79.95
    Price: $75.15
    View
    Availability:

    Back Ordered

    Magpul Item #: MP MAG379-BLK -

      The Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please...

      ACS-L Carbine Stocks Mil-Spec
      Magpul
      Retail: $79.95
      Price: $75.15
      View
      Availability: Out Of Stock / Not Available For Back Orders
      Magpul

      Product DetailsThe Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package.Made in U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product ...

      AFG - Angled Fore Grip
      Magpul
      Retail: $34.95
      Price: $29.00-$32.85
      View
      Availability: Out Of Stock / Not Available For Back Orders
      Magpul

      Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. Made in U.S.A. E.A.R. Export...

      AFG-2 - Angled Fore Grip
      Magpul
      Retail: $34.95
      Price: $32.85
      View
      Availability:

      Back Ordered

      Magpul Item #: MP MAG414 -

      The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon...

      AMAG™ 17 SG9™ – SIG P320™/M17™ magpul, magpul industries, magpul p320, magpul p320 magazines, p320 magazine, sig p320 magazine, sig p320 magazines, metal p320 magazine, sig magpul p320 magazines, magpul p320 metal magazine
      New!
      Magpul
      Retail: $34.95
      Price: $33.00
      View
      Availability:

      In Stock

      Magpul Item #: MP MAG1331-SST -

      CORROSION-RESISTANT, STAINLESS-STEEL MAGAZINE BODY High-visibility, controlled-tilt follower Stainless-steel spring for longevity and durabilityCAPACITY INDICATORS IN ONE-ROUND INTERVALS STARTING AT FIVE ROUNDS FLARED, EASILY REMOVEABLE FLOORPLATE FOR MAINTENANCE Paint pen dot matrix panel on the bottom to allow for identification marking ...

      ARMORERS WRENCH AR15/M4
      Magpul
      Retail: $79.95
      Price: $75.15
      View
      Availability:

      In Stock

      Magpul Item #: MP MAG535 -

        Product DetailsAmerican-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric...

        ASAP - Ambidextrous Sling Attachment Point
        Magpul
        Retail: $29.95
        Price: $28.15
        View
        Availability:

        In Stock

        Magpul Item #: MP MAG500 -

          ASAP QD-AMBISLNG ATCH PT QD BK
          Magpul
          Retail: $29.95
          Price: $28.15
          View
          Availability:

          In Stock

          Magpul Item #: MP MAG529 -

            The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4...

            B.A.D. Lever - Battery Assist Device AR15/M4
            Magpul
            Retail: $29.95
            Price: $26.69
            View
            Availability:

            In Stock

            Magpul Item #: MP MAG980 -

            Bipod for M-LOK
            Magpul
            Retail: $109.95
            Price: $103.35
            View
            Availability:

            Back Ordered

            Magpul Item #: MP MAG933 -

            Magpul BipodThe Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod...

            Bolt Action Magazine Well - Hunter 700 Stock
            Magpul
            Retail: $69.95
            Price: $65.75
            View
            Availability:

            In Stock

            Magpul Item #: MP MAG497-BLK -

              The Magpul Bolt Action Magazine Well is a drop-in solution for our Remington 700 Hunter Stock for those that are wishing to add detachable box magazine capabilities to their rifle. By simply removing your OEM bottom metal and our spacer from the Hunter 700 Stock, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting from gunsmiths. Designed to work with AICS pattern, short action magazines. This kit also includes one Magpul PMAG 5 7.62 AC....

              Bolt Action Magazine Well 700L Magnum-Hunter 700L Stock
              Magpul
              Retail: $79.95
              Price: $75.15
              View
              Availability:

              In Stock

              Magpul Item #: MP MAG569-BLK -

                The Magpul Bolt Action Magazine Well 700L Magnum is a drop-in detachable box magazine solution for our Hunter 700L Stock. By simply removing your OEM bottom metal from the Hunter 700L, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting. Designed to work with AICS-pattern long action magazines, this kit also includes one Magpul PMAG 5 AC L, Magnum for .300WM based family of cartridges. Made in the USA. FEATURES Designed specifically for...

                Bolt Action Magazine Well 700L Standard-Hunter 700L Stock
                Magpul
                Retail: $79.95
                Price: $75.15
                View
                Availability:

                In Stock

                Magpul Item #: MP MAG489-BLK -

                  The Magpul Bolt Action Magazine Well 700L Standard is a drop-in detachable box magazine solution for our Hunter 700L Stock. By simply removing your OEM bottom metal from the Hunter 700L, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting. Designed to work with AICS-pattern long action magazines, this kit also includes one Magpul PMAG 5 AC L, Standard for .30-06 based family of cartridges. Made in the USA. FEATURES Designed specifically...

                  BSL Arm Brace Mil-Spec magpul, magpul bsl, magpul arm brace
                  Magpul
                  Retail: $59.95
                  Price: $40.00
                  View
                  Availability:

                  In Stock

                  Magpul Item #: MP MAG1143-BLK -

                  IMPROVES SINGLE-ARMED USE OF LARGE-FORMAT PISTOLS Designed and intended for use as a stabilizing accessory for one-handed firingM-LOK compatible slots for additional sling mounting options Ambidextrous rear QD cup allows sling tension to be applied while firing with one hand to improve stability Toolless, single-handed adjustment SIMPLE, STRONG CONSTRUCTION High-strength polymer and metal construction COMPATIBILITY Mil-Spec sized carbine receiver extension equipped AR Pistols. Not compatible...

                  CTR Carbine Stock  Commercial-Spec
                  Magpul
                  Retail: $59.95
                  Price: $56.35
                  View
                  Availability:

                  Back Ordered

                  Magpul Item #: MP MAG311 -

                  The Magpul CTR (Compact/Type Restricted) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept...

                  CTR Carbine Stock  Mil-Spec
                  Magpul
                  Retail: $59.95
                  Price: $56.35
                  View
                  Availability:

                  Back Ordered

                  Magpul Item #: MP MAG310 -

                  The Magpul CTR (Compact/Type Restricted) Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any...

                  CTR/MOE 0.25" CHEEK RISER
                  Magpul
                  Retail: $19.95
                  Price: $18.75
                  View
                  Availability:

                  Back Ordered

                  Magpul Item #: MP MAG325 -

                  Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

                  DAKA Essential Wallets
                  Magpul
                  Retail: $16.95
                  Price: $15.93
                  View
                  Availability: Out Of Stock / Not Available For Back Orders
                  Magpul

                  The Essential Wallet is an extension of our Magpul DAKA collection. Made to hold only the cards that are essential to your daily life in one convenient place, eliminating the bulk and clutter of unnecessary cards. This makes finding what you need simple and hassle free. What do you really need to carry with you in your wallet We believe that it is Three ID/Access cards, Three Credit Cards and Three Bills. The single pocket logo side is used to hold up to four ID/access cards and the dual...

                  DAKA Everyday Wallets
                  Magpul
                  Retail: $24.95
                  Price: $23.45
                  View
                  Availability: Out Of Stock / Not Available For Back Orders
                  Magpul

                  The Magpul DAKA Everyday Wallet was designed in the same spirit of our original wallets, but with greater functionality and extra room for those times when you need a little more out of your wallet. Our family of wallets provides a slim, strong, and durable alternative to bulky wallets and overloaded pockets. Like the rest of our Magpul DAKA products, its resistant to just about everything. Our reinforced polymer material holds up to hard use and keeps your everyday essentials secure. For...

                  DAKA Pouch - Medium
                  Magpul
                  Retail: $22.95
                  Price: $21.57
                  View
                  Availability:

                  Back Ordered

                  Magpul Item #: MP MAG857 -

                  The Magpul DAKA Pouch, designed to bring organization to the dusty, dirty, and muddy world we work and play in. Made from polymer infused textiles that are welded on all seams and use a genuine YKK water resistant zipper. The construction methods and materials used mean that these pouches are at home in hard use applications like tool storage or bulk storage of your reloaded ammunition as well as lighter duties like organizing your personal electronic accessories. Although these pouches are...

                  DAKA POUCH, SMALL, YLW,
                  Magpul
                  Retail: $18.95
                  Price: $17.81
                  View
                  Availability:

                  Back Ordered

                  Magpul Item #: MP MAG856-720 -

                    The Magpul DAKA Pouch, designed to bring organization to the dusty, dirty, and muddy world we work and play in. Made from polymer infused textiles that are welded on all seams and use a genuine YKK water resistant zipper. The construction methods and materials used mean that these pouches are at home in hard use applications like tool storage or bulk storage of your reloaded ammunition as well as lighter duties like organizing your personal electronic accessories. Although these pouches are...

                    DAKA Window Pouch - Large
                    Magpul
                    Retail: $30.95
                    Price: $27.00
                    View
                    Availability: Out Of Stock / Not Available For Back Orders
                    Magpul

                    REINFORCED POLYMER FABRIC WITH ANTI-SLIP TEXTUREOur unique polymer-infused material protects your stuff from exposure, moisture, and from getting lost.Paint pen dot matrix debossed into body for identification markingEASY TO KEEP ORGANIZEDTranslucent window on one sideCarabiner attachment points 550 PARACORD & HEAT SHRINK TUBING FOR ENHANCED GRIP Rugged but easy to open and close zipper WELDED CONSTRUCTION AND YKK AQUAGUARD® ZIPPER Impenetrable seals on all sides and a water repellent zipper...

                    DT Carbine Stock – Mil-Spec magpul, magpul dt stock, magpul carbine stock, magpul dt carbine stock, magpul stock, magpul mil spec stock
                    Magpul
                    Retail: $64.95
                    Price: $59.00
                    View
                    Availability:

                    In Stock

                    Magpul

                      NEXT GEN AR STOCK Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever ENHANCED ERGONOMICS Newly designed non-slip butt-pad with optimized curvature allows for easier shoulder transitions and better fit when...

                      Enhanced AR Magazine Release
                      Magpul
                      Retail: $19.95
                      Price: $18.75
                      View
                      Availability:

                      In Stock

                      Magpul Item #: MP MAG568-BLK -

                        The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble free magazine changes. With easy bolt-on installation with no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight. Features: Machined from mil-spec anodized aluminum Two-piece construction for easy installation and reduced profile Provides larger contact surface for positive activation Compatible with most 5.56...

                        Enhanced Rubber Butt-Pad, 0.70"
                        Magpul
                        Retail: $19.95
                        Price: $18.75
                        View
                        Availability:

                        In Stock

                        Magpul Item #: MP MAG317-BLK -

                          The Extended Rubber Butt-Pad, 0.55" comes standard with the CTR and MOE Commercial-Spec stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be used with the Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks for 0.25" increased length-of-pull. All mounting hardware included.

                          Enhanced Self Leveling Follower
                          Magpul
                          Retail: $5.95
                          Price: $5.59
                          View
                          Availability: Out Of Stock / Not Available For Back Orders
                          Magpul

                          The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the aluminum USGI 30-round magazine black or green follower.Featuring a patent pending 4-way anti-tilt design for increased feeding reliability, the Enhanced Self-Leveling Follower is made from a non-hygroscopic and self-lubricating polymer.Made in the U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product

                          Extended Rubber Butt-Pad, 0.55"
                          Magpul
                          Retail: $19.95
                          Price: $18.75
                          View
                          Availability:

                          In Stock

                          Magpul Item #: MP MAG316-BLK -

                            The Rubber Butt-Pad, 0.30" comes standard with the CTR and MOE Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position. All mounting hardware included. Made in U.S.A.

                            Field Case - iPhone 7
                            Magpul
                            Retail: $16.95
                            Price: $15.93
                            View
                            Availability:

                            Back Ordered

                            Magpul Item #: MP MAG845-BLK -

                              The Magpul Field Case for the iPhone 7 is a semi-rigid cover designed to provide basic protection in the field. Made from a flexible thermoplastic, the Field Case features PMAG-style ribs for added grip, snap-on design for easy installation and removal, and slides easily in and out of pockets without snagging. Designed and manufactured in the U.S.A.! Features Compatible with iPhone 7 Semi-rigid thermoplastic elastomer construction provides protection against minor bumps and abrasions Compact...

                              FIELD CASE-GALAXY S8, BK
                              Magpul
                              Retail: $16.95
                              Price: $15.93
                              View
                              Availability:

                              Back Ordered

                              Magpul Item #: MP MAG934-BLK -

                                FIELD CASE-GALAXY S8, FD
                                Magpul
                                Retail: $16.95
                                Price: $15.93
                                View
                                Availability:

                                Back Ordered

                                Magpul Item #: MP MAG934-FDE -

                                  Forward Sling Mount  Rem 870 & Mossberg 500/590
                                  Magpul
                                  Retail: $34.95
                                  Price: $30.00
                                  View
                                  Availability:

                                  In Stock

                                  Magpul Item #: MP MAG508 -

                                    Product DetailsThe Forward Sling Mount is a sling attachment point for the Remington 870 and Mossberg 500/590/Maverick series of shotguns which clamps onto the barrel and extended magazine tube. It can be configured for use with either Push-Button QD Sling Swivels or one-point clip-in style attachments such as the MS3 Paraclip, the HK hook, ITW MASH hook, and others. Made from precision cast steel that is Melonite treated for wear and corrosion resistance. Dedicated fit for the Remington 870...

                                    GL L-Plate PMAG GL9, 3 PACK
                                    Magpul
                                    Retail: $19.95
                                    Price: $18.75
                                    View
                                    Availability:

                                    In Stock

                                    Magpul Item #: MP MAG567-BLK -

                                      The Magpul GL L-Plate fits the PMAG 17 GL9 and PMAG 15 GL9, and is made of durable reinforced polymer with a rubber overmold. Tailor made for competition or defensive use, the GL L-Plate is designed to aid in seating of the magazine into extended magazine wells and to provide positive traction and impact protection without unnecessary bulk. Available in packs of three, the GL L-Plate installs easily without tools in place of the original PMAG floor plate. Made in U.S.A. FEATURES: Designed for...

                                      Hunter 700L Stock  Remington 700 Long Action
                                      Magpul
                                      Retail: $279.95
                                      Price: $263.15
                                      View
                                      Availability: Out Of Stock / Not Available For Back Orders
                                      Magpul

                                      Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Hunter 700L Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true drop-in solution for the end user*. The 700L is also M-LOK compatible to accept a broad range of accessories. Also compatible with our Bolt Action Magazine Well 700L which allows the rifle...

                                      Hunter X-22 Stocks  Ruger 10/22
                                      Magpul
                                      Retail: $139.95
                                      Price: $131.55
                                      View
                                      Availability: Out Of Stock / Not Available For Back Orders
                                      Magpul

                                      The Magpul Hunter X-22 chassis is an ergonomic, full-featured stock for the ubiquitous Ruger 10/22 rifle. Made from high quality reinforced polymer, the Hunter X-22 features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK slots for accessory attachment. The Hunter X-22 fits standard Ruger 10/22 .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures...

                                      Hunter X-22 Takedown Stocks  Ruger 10/22 Takedown
                                      Magpul
                                      Retail: $149.95
                                      Price: $140.95
                                      View
                                      Availability: Out Of Stock / Not Available For Back Orders
                                      Magpul

                                      The Magpul Hunter X-22 Takedown chassis is an ergonomic, full-featured stock specifically designed for the Ruger 10/22 Takedown series of rifles. Made from high quality reinforced polymer, the Hunter X-22 Takedown features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK slots for accessory attachment. , The Hunter X-22 Takedown fits standard Ruger 10/22 Takedown .22 LR pattern...

                                      Hunter/SGA OEM Butt-Pad Adapter
                                      Magpul
                                      Retail: $9.95
                                      Price: $9.35
                                      View
                                      Availability:

                                      In Stock

                                      Magpul Item #: MP MAG318-BLK -

                                        Product DetailsThe Hunter/SGA OEM Butt-Pad Adapter allows the user to replace the factory recoil pad on Magpul SGA Remington or Mossberg Shotgun Stocks as well as the Hunter 700 Stock with a Remington 870 synthetic-pattern butt-pad of their choice (not included).By utilizing the original spacers, this adapter retains all the functionality of the Hunter and SGA Stocks while providing for additional butt-pad options.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

                                        L-Plate  USGI 5.56x45, 3 Packs
                                        Magpul
                                        Retail: $24.95
                                        Price: $19.99
                                        View
                                        Availability: Out Of Stock / Not Available For Back Orders
                                        Magpul

                                        The Magpul L-Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines that incorporates a rubberized pad. Bumper pad is made of durable Santoprene rubber overmolded onto a stainless steel plate. Bumper pad is made of durable Santoprene rubber overmolded onto a stainless steel plate. Made in the U.S.A. ITAR International Traffic in Arms Regulations Controlled Product.

                                        Ladder Rail Panels
                                        Magpul
                                        Retail: $11.95
                                        Price: $11.23
                                        View
                                        Availability: Out Of Stock / Not Available For Back Orders
                                        Magpul

                                        Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc. Available in Black, OD Green and Flat Dark Earth. E.A.R. Export Administration Regulations Controlled Product / ...

                                        Light Mount V-Block and Rings
                                        Magpul
                                        Retail: $17.95
                                        Price: $16.87
                                        View
                                        Availability:

                                        In Stock

                                        Magpul Item #: MP MAG614-BLK -

                                          The versatile Light Mount V-Block and Rings is a nearly-universal mounting solution for attaching a handheld light to compatible Magpul light mounts. Constructed of reinforced polymer and milspec-anodized aluminum, the Light Mount V-Block and Rings allow the user to install lights with a body diameter from .75" to 1.04" onto the MOE Scout Mount and M-LOK Cantilever Rail/Light Mount (comes pre-installed on the Magpul Rail Light Mount). In conjunction with these compatible Magpul mounts, the...

                                          M-LOK AFG - Angled Fore Grips
                                          Magpul
                                          Retail: $26.95
                                          Price: $25.33
                                          View
                                          Availability: Out Of Stock / Not Available For Back Orders
                                          Magpul

                                          The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is " shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its...

                                          M-LOK ALUM RAIL SECTION
                                          Magpul
                                          Retail: $18.95
                                          Price: $16.87-$22.51
                                          View
                                          Availability:

                                          Back Ordered

                                          Magpul Item #: MP MAG580-BLK-clone1 -

                                          Product DetailsDesigned for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is...

                                          M-LOK BIPOD MOUNT
                                          Magpul
                                          Retail: $22.95
                                          Price: $21.57
                                          View
                                          Availability:

                                          In Stock

                                          Magpul Item #: MP MAG609 -

                                            Product DetailsThe Magpul M-LOK Bipod Mount allows for the attachment of Harris-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is...

                                            M-LOK Cantilever Rail/Light Mount, Polymer
                                            Magpul
                                            Retail: $17.95
                                            Price: $16.87
                                            View
                                            Availability:

                                            In Stock

                                            Magpul Item #: MP MAG587-BLK -

                                              Designed for use with all M-LOK mounting surfaces, the M-LOK Polymer Cantilever Rail/Light Mount allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings. The Cantilever Rail/Light Mount has Picatinny slots that extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning...

                                              M-LOK GI SLING SWIVEL, BK
                                              Magpul
                                              Retail: $19.95
                                              Price: $18.75
                                              View
                                              Availability:

                                              In Stock

                                              Magpul Item #: MP MAG809-BLK -