What It Does
Dropping this kit into your Smith & Wesson M&P will set the trigger break point farther forward than the factory trigger assembly, as well as significantly reduce the uptake and over travel. It produces a trigger pull very similar to that of a 1911 but in a polymer frame striker-fired pistol. The Forward Set Trigger body is machined from aircraft-grade aluminum and black hard anodized to last a lifetime. The smooth faced trigger comes assembled with a center pivoting safety. The Forward Set Sear & Trigger Kit boasts a smooth trigger pull throughout the break. The kit comes with two (2) trigger return springs; one designed to produce approximately a 4.0 lbs trigger pull (silver spring), and one to produce a 5.0 lbs trigger pull (green spring). These two options give the end user the ability to customize their trigger pull for their specific needs.
Expected Results
- Reduced trigger pre-travel and over travel to produce a feel similar to a single action fire control system
- Overall reduction in trigger travel is approximately 50%
- A smooth trigger pull all the way through to the break
- Reduced reset
- Center mounted pivoting safety maintains factory safety values
- .0 lbs (silver spring) or 5.0 lbs (green spring) trigger pull weight, depending on which trigger return spring is installed
Applicable To What Gun(s)
- Works with all Smith & Wesson M&P Pistols (excluding M&P M2.0) in all centerfire calibers and configurations.
- Does NOT function in the M&P M2.0, M&P Shield, BodyGuard, 22 or 22 Compact pistols.
- Requires the use of the sear housing block designed for the large size sear plunger and spring (current production as of June, 2011)
Features & Specifications
- Lowers trigger weight to approximately 4.0 lbs (silver spring) and 5.0 lbs (green spring)
- Smooth uptake and reset
- Center mounted pivoting safety maintains factory safety values
- Works with all Smith & Wesson M&P pistols in centerfire calibers (excluding the Shield)
- Easy to install (watch the installation video)
- Requires use of sear housing block designed for large size sear plunger and spring (current production as of June 2011)
In The Package
- 1 ea. Aluminum Forward Set Trigger
- 1 ea. Forward Set Sear
- 1 ea. Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)
- 1 ea. Forward Set Spring Kit (Silver 4.0lb Trigger Return Spring, Green 5.0lb Trigger Return Spring, Polymer Slave Pin, Sear Spring and Blue RAM Spring)
Notes:
This particular product usually requires a slight modification to the trigger bar loop for proper function. Please see the Trigger Bar Loop Adjustment video on how to tune the trigger bar.
*This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring.
Items marked as Special Order are ordered from the manufacturer. Being a manufacturer direct dealer, we are dependent on their warehouse inventory and production schedule. While most Special Order turn-around time is about 30 days, some may take a lot longer based on manufacturer availability. Your card will not be charged until the item ships.