Products 25-48 of 61
Show
Price: $105.00-$115.00
View
Availability: Out Of Stock / Not Available For Back Orders
Price: $105.00-$115.00
View
Availability: Out Of Stock / Not Available For Back Orders
The Super Charging Handle (SCH) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids...
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 08-159 -
SPECS: Mil-Spec M4 Upper Receiver AssemblyGeissele Reliability Enhanced Bolt Carrier GroupGeissele Airborne Charging Handle, DDCGeissele SMR MK16, DDC, 13.5"Geissele 5.56MM 14.5" GOV profile, CHF, Chrome Lined, ML Gas, BarrelGeissele Super Gas Block .750 Low-Profile Gas Block, Pinned (Bombproof Installation)SureFire SF4P 4 Prong Flash Hider, Pinned & WeldedSuper 42 Braided Wire Buffer Spring and H1 Buffer Combo INCLUDED! ...
Item #: GEIS 08-176 -
Mil-Spec M4 Upper Receiver Assembly Geissele Reliability Enhanced Bolt Carrier Group Geissele Airborne Charging Handle, DDC Geissele SMR MK16, DDC, 9.3" Geissele 5.56MM 10.3",GOV profile, CHF, Chrome Lined, Carbine Gas, Mag Phos, ChromolyV, 1/7 Twist, Barrel Geissele Super Gas Block .750 Low-Profile Gas Block, Pinned (Bombproof Installation) SureFire SF4P 4 Prong Flash Hider Super 42 Braided Wire Buffer Spring and H3 Buffer Combo INCLUDED! ...
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 08-315 -
This upper receiver group is a Complete 11.5" variant of the Geissele URG-I. NFA DISCLAIMER/WARNING: This item does not meet the 16" minimum barrel length requirement, and requires registration and a tax stamp with the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) when assembled into a complete rifle. Additional state and local restrictions may apply. It is the sole responsibility of the buyer to comply with any and all applicable laws ...
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 04-246-F -
To change the Geissele Automatics H1 Buffer assembly to the heavier H2 or H3 buffer setup, you will need to disassemble and re-assemble the buffer replacing the steel weights with the correct number of tungsten weights. 1 Tungsten weight to add over all weight to your buffer setup. (H1 / H2 / H3 setups) Note : We are a factory direct LE/Mil dealer. Special Order turn-around time is dependent on the manufacturers inventory and production schedule. While most orders are filled within 3-5 weeks,...
Item #: GEIS 05-495 -
The Geissele Super 42 Spring was designed to improve the function and reliability of your AR-15 pattern rifle. Its unique spring design uses three independent strands of wire, just like the German MG42 Machine Gun. This concept acts as a harmonic damper and energy absorber by allowing the springs to flex separately from each other. This flex helps displace excess energy which decreases the chance of spring failure and assists with making your AR-15 more reliable.Compared to the stock spring,...
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 08-162B -
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 08-163S -
Item #: GEIS 08-153 -
The Geissele Maritime Bolt Catch is designed with the warfighter in mind and will work with any lower receiver designed to accept a mil-spec M16/M4 Carbine bolt catch. The increased surface area promotes ease of function when locking back the bolt or releasing the bolt after a magazine change. In addition, the extended controls add an increased functionality for left handed shooters who no longer have to break their grip to manipulate the bolt catch. Left handed shooters can easily reach the...
Item #: GEIS 05-101 -
The Geissele Super Semi-Automatic (SSA) trigger is a semi-automatic only version of Geissele Automaticss Super Select-Fire trigger. The SSA is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The SSAs two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for CQB. The SSA is safety certified by Crane Naval Surface Warfare Center. It is recommended for demanding...
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 02-313 -
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 05-102 -
The Geissele Super Select-Fire (SSF) Trigger is a select-fire combat trigger that Geissele Automatics developed for the U.S. Special Operations Community. The SSF is a non-adjustable combat style two-stage trigger that is available in 4.5lb. and 5.5lb. configurations. In semi-automatic mode, the SSF is a precision two-stage trigger that allows precise and accurate trigger control. In fully-automatic mode, the SSF is a single-stage trigger with a smooth, continuous trigger pull and abrupt...
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 05-123 -
Item #: GEIS 05-145 -
The Geissele 2 Stage (G2S) was designed to be a high quality, cost effective option of the SSA. The G2S is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The G2S is manufactured from the same tool steel as the SSA. Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability is the same. The G2S however has a different way of holding the hammer pin in place, there is no...
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 05-150 -
Hi-Speed National Match Triggers - Large Pin Series Geissele Automatics currently offers three large pin Hi-Speed trigger products. These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference. The Geissele Service Trigger...
Item #: GEIS 05-960 -
What is Geissele Nanoweapon? Geissele Nanoweapon (also known as Picatinny DSL) is a family of Durable Solid Lubricant coatings which was developed by ARDEC. It is available exclusively from Geissele Automatics. We continued the development of Picatinny DSL so that its level of corrosion, wear and abrasion resistance is currently unmatched among firearm coatings. Nanoweapon is applied at low temperatures so that the underlying metallurgy of the part is non effected by the application process....
Item #: GEIS 05-959 -
What is Geissele Nanoweapon? Geissele Nanoweapon (also known as Picatinny DSL) is a family of Durable Solid Lubricant coatings which was developed by ARDEC. It is available exclusively from Geissele Automatics. We continued the development of Picatinny DSL so that its level of corrosion, wear and abrasion resistance is currently unmatched among firearm coatings. Nanoweapon is applied at low temperatures so that the underlying metallurgy of the part is non effected by the application process....
Item #: GEIS 05-267 -
The Geissele Super Sabra was born from the combat heritage of the SSA and is a drop in replacement for the OEM trigger pack. It is a precision two-stage trigger and allows precise and accurate trigger control. The Super Sabras two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for close quarter combat (CQB). The Geissele Super Sabra also features an adjustable first stage, which will allow the shooter the ability to fine tune the first...
Item #: GEIS 05-328 -
The Super Sabra Lightning Bow Trigger is precision machined from precipitation hardened 17-4 and is designed to replace the standard trigger in IWI Tavor rifles. Once installed, the Sabra Lightning Bow is adjustable via a set screw that removes the slack that is inherently found in the trigger mechanism of those rifles. By removing the slack, the trigger pull is instantly transformed into a feel that is much more familiar to that of an M4 Carbine. Pairing the Sabra Lightning Bow with a Super...
Item #: GEIS 05-400 -
Weapon Platform AR15/AR10 Intended Function Hunting, Target Shooting, Precision Shooting Trigger Bow Type M4 Curved Notes Please note, our triggers are designed for mil-spec AR15/M4 carbine rifles. Our AR15 triggers are not compatible with the Sig MPX/MCX weapons or Pistol Caliber Carbine AR15/M4 variants. Using them in these platforms will void the warranty. Please refer to our Super MCX SSA or Super MPX SSA if you are using these platforms. Size Standard Mil-Spec Pin ...
Availability: Out Of Stock / Not Available For Back Orders
Item #: GEIS 05-483 -
The Single-Stage Precision (SSP) is Geissele Automatics first true single-stage trigger for the AR platform. This drop-in trigger has no take up and a super clean break. The reset is short yet still distinct, giving excellent feedback to the shooter during target engagement. Combining these two capabilities provides the shooter with the confidence to take precise shots where accuracy is crucial and the speed for quick follow up hits is essential. As with all Geissele Automatics products the...
Item #: GEIS 05-181 -
Hi-Speed National Match Triggers Geissele Automatics currently offers three large pin Hi-Speed trigger products. These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference. The Geissele Service Spring SetThe Geissele...