Aero Precision

MADE IN AMERICA?YesFINISHNoPLATFORMMultiMANUFACTURERNoWEIGHT(S)1.6 ozOTHER FEATURES-

Features: Fits barrels with .750 Outer DiameterConstructed from 4140 hardened steelNitride or Phosphate coatingLow profile for easy fitmentSet Screws are Steel 10-32 x 3/16 Knurled Cup PointMade in the USA*Roll pin not included*

MADE IN AMERICA?YesFINISHNoPLATFORMAR15MANUFACTURERNoWEIGHT(S)11.52 ozOTHER FEATURES-

MADE IN AMERICA?YesFINISHNoPLATFORMAR15MANUFACTURERNoWEIGHT(S)11.52 ozOTHER FEATURES-

MADE IN AMERICA?YesFINISHNoPLATFORMAR15MANUFACTURERNoWEIGHT(S)11.52 ozOTHER FEATURES-

Our upgraded nickel boron bolt carrier group is an eye catching addition to your AR build. Mil-spec dimensions and coating ensure the highest quality and correct component interface.

Features: Standard low-profile design provides great fit under slim profile free float handguards including the Aero Precision ATLAS series of handguards Adjustment screw is held in place by a spring and detent, providing repeatable audible "clicks" upon adjustment removing the need for secondary set screws that can come loose under recoilCustom machined stainless-steel adjustment screw provides 15 gas adjustment settingsCarbon fouling is channeled to a sacrificial chamber to help prevent...

Aero Precision's S-ONE line of handguards have been designed with size and weight savings in mind, delivering the perfect handguard for your lightweight build. The Aero Taper Lock Attachment System (ATLAS) is a durable and dependable mounting platform, maintaining a slim profile while providing strength and stability. It features two mirrored, tapered, locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut using a turnbuckle screw. A ratcheting...

The M4E1 Threaded Upper Receiver features a new angular machined design that helps it stand apart from standard mil-spec upper receivers. This upper receiver features the same enhanced body profile as our M4E1 Enhanced Upper Receiver but is threaded to accept a standard AR15 barrel nut. It is forged from 7075-T6 Aluminum, precision machined to work with all mil-spec AR15 parts and includes the port door and forward assist pre-installed. The M4E1 Threaded Upper Receiver is designed to pair...

The AR15 Assembled Upper Receiver comes with the port door and forward assist already installed. Forged from 7075-T6 aluminum, this assembled upper is precision machined to mil- spec M16/M4 specifications and features M4 feedramps. Match this upper with one of our AR15 lower receivers for a solid and dependable fit.

The AR15 Bar Barrel Nut is used to connect BAR style handguards to standard threaded upper receivers. This product comes with 4 shims to properly time the gas tube with the upper receiver.Compatible with mil-spec threaded upper receivers ONLY.

Our Enhanced M-LOK (EM) Handguards provide a lightweight free float design for your custom AR15 build. The M-LOK system allows advanced modularity past the current 1913 picatinny rail system. Machined to mil-spec dimensions and engineered to perfection, this handguard eliminates bulk while retaining strength and stability.

DESCRIPTION Aero Precision's line of Lower Parts Kits featuring Magpul™ Grips is designed to be versatile for your needs. Each kit is available with MOE™ and MOE SL™ Grip Options in Black and FDE. Buy with our tried and true mil-spec Fire Control Group or save for an upgraded trigger with our MINUS FCG offerings. This AR15 Lower Parts Kit includes the components needed to assemble an Aero Precision AR15 Gen 2 Lower Receiver or similar mil-spec lower receiver. It features a Magpul MOE™ Grip and...

Our lower parts kit helps you to build a custom AR15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.

Our AR15 Gen 2 Stripped Lower Receiver is the perfect base for your custom AR15 build. Machined to mil-spec dimensions, our lowers work with standard AR15 components and ensure the highest quality with a correct component interface.Gen 2 Improvements Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper...

Our Special Edition: PEW AR15 Gen 2 Stripped Lower Receiver features custom "PEW PEW PEW" and "NO PEW" safety selector markings on our popular AR15 lower platform. Machined to mil-spec dimensions, our lowers work with standard AR15 components and ensure the highest quality with a correct component interface. Order Details Not available where prohibited by law Offer not available in all states All web sales must go through a Federal Firearms Licensee Your order confirmation will contain...

Aero Precision's AR-15 Stripped Receiver Set features a AR-15 Stripped Upper Receiver and a AR-15 Gen 2 Stripped Lower Receiver both finished in a Magpul FDE Ceakote. The upper features M4 Feedramps and .250" takedown pin holes. The lower features a rear takedown pin detent hole that is threaded for a 4-40 set screw. Both upper and lower work well with standard AR15 components and magazines, and are machined from 7075-T6 forged aluminum.

The LAMBDA PRS30 is the next evolution in precision rifle shooting muzzle brakes. It features a two-piece design consisting of the LAMBDA Muzzle Brake and the Jam Nut, which combine for an amazingly simple tool-less installation of the device. The LAMDA PRS Muzzle Brake features an 11? target crown for accuracy and a bold four chamber design that works in conjunction with the jam nut to self-tighten during every shot. The LAMBDA PRS30's chamber design virtually eliminates recoil allowing the...

Custom Aero Precision logo Markings include: Property of U.S.A., MOD M16A4, CAL. 5.56MM Serial number designation Safe/Semi/Auto safety selector markings Stripped AR15 Lower Receiver, Gen 2 Nylon tipped tensioning set screw Order Details Not available where prohibited by law Offer not available in all states All web sales must go through a Federal Firearms Licensee Your order confirmation will contain information on how to submit your qualification credentials and FFL's information Coupon...

Custom Aero Precision logo Markings include: Property of U.S.A., MOD M4 CARBINE, CAL. 5.56MM Serial number designation Safe/Semi/Auto safety selector markings Stripped AR15 Lower Receiver, Gen 2 Nylon tipped tensioning set screw Order Details Not available where prohibited by law Offer not available in all states All web sales must go through a Federal Firearms Licensee Your order confirmation will contain information on how to submit your qualification credentials and FFL's information Coupon...

The M4E1 Lower Receiver delivers billet aesthetics in a forged package. This custom designed enhanced forging is machined from 7075-T6 Aluminum and compatible with all mil-spec AR15 parts. Aside from the visual upgrades this custom engineered design provides that challenge much more expensive billet options, we have added several functional features to the lower receiver to simplify the assembly process for the at home builder. M4E1 Lower Receiver Improvements: Threaded Bolt Catch Roll Pin -...

Our Special Edition: PEW M4E1 Stripped Lower Receiver features custom "PEW PEW PEW" and "NO PEW" safety selector markings on our popular M4E1 lower platform. Machined to mil-spec dimensions, our lowers work with standard AR15 components and ensure the highest quality with a correct component interface. Order Details Not available where prohibited by law Offer not available in all states All web sales must go through a Federal Firearms Licensee Your order confirmation will contain information...

M4E1 Thunder Ranch Special Edition Lower Receiver Improvements: Skeletonized Magwell - Cuts weight and provides a unique look for our M4E1 Lower Receivers.Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly.Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the...

Includes: M4E1 Threaded Assembled Upper Receiver, Special Edition: Thunder Ranch12" ATLAS R-ONE Handguard of choice14.5" 5.56 Mid-Length CMV BarrelLow Profile Gas Block and Mid Length Gas TubeVG6 Precision Delta 556Magpul MBUS Front/Rear Flip-Up Sights - BlackProduct comes assembledThis complete upper does not include BCG or Charging Handle. These products may be selected as add-ons under the Finish Your Build tabThe muzzle brake that comes with this complete upper receiver is pinned, and...

Includes: M4E1 Threaded Assembled Upper Receiver, Special Edition: Thunder Ranch15" ATLAS R-ONE Handguard of choice16" 5.56 Mid-Length CMV BarrelLow Profile Gas Block and Mid Length Gas TubeVG6 Precision Delta 556Magpul MBUS Front/Rear Flip-Up Sights - BlackProduct comes assembledThis complete upper does not include BCG or Charging Handle. These products may be selected as add-ons under the Finish Your Build tab M4E1 Thunder Ranch Threaded Upper Receiver Features: Thunder Ranch Logo on tangNo...

M5 (.308) Stripped Lower Receiver, Anodized Black

The M5E1 Handguard Barrel Nut is used to connect Aero Precision M5 Enhanced Handgaurds to standard AR10 & DMPS pattern threaded upper receivers. This product comes with 5 shims to properly time the gas tube with the upper receiver.

 M4E1 Thunder Ranch Special Edition Lower Receiver Improvements: Skeletonized Magwell - Cuts weight and provides a unique look for our M4E1 Lower Receivers.Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly.Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into...

The VG6 EPSILON 556 is the pinnacle of AR15 muzzle devices. The EPSILON 556 just outperforms everything on the market.Designed for the discriminating shooter and professional end-users, VG6 Precision's EPSILON 556 affords you the best muzzle control and recoil mitigation the industry has to offer. This is a true combination muzzle brake / compensator / flash hider. Its performance is matched only by the amazing look of this device.The VG6 Epsilon 556 carries many of the same characteristics as...

The EPSILON 556SL is the ideal muzzle brake for 14.5" rifle builds. Featuring an outside diameter of .745", the EPSILON 556SL can be pinned and welded to your barrel while still allowing full maintenance and removal of your gas block without having to remove the muzzle device. The EPSILON 556SL utilizes a new aggressive chamber design that improves gas flow and reduces felt recoil significantly. It also features deep channel cuts that greatly reduce the overall weight toward the front end of...

The VG6 Precision EPSILON 762 is a high performance muzzle brake for eliminating recoil. Compatible with most common .30 caliber chambered rifles, this hybrid device features both recoil compensation and flash signature mitigation in one package. With a continued focus on improved recoil control, the EPSILON 762 features a new enhanced chamber design that improves gas flow and felt recoil measurably over previous versions. We have also focused on saving weight through both the chamber design...

The next evolution in Pistol Caliber Carbine recoil control has finally arrived. The VG6 EPSILON 9mm sets a new standard when it comes to recoil management by virtually eliminating any muzzle movement. This combination muzzle brake / compensator / flash hider is matched only by the amazing look of this device. The VG6 Epsilon 9mm carries many of the same characteristics that has made its higher-pressure cousin a runaway success. Three extended flash hiding prongs help minimize muzzle flash...

The VG6 EPSILON AK is the pinnacle of AK47 muzzle devices. The EPSILON AK just outperforms everything on the market. Designed for the discriminating shooter and professional end-users, VG6 Precision's EPSILON AK affords you the best muzzle control and recoil mitigation the industry has to offer. This is a true combination muzzle brake / compensator / flash hider. Its performance is matched only by the amazing look of this device. The VG6 Epsilon AK carries many of the same characteristics as...

The VG6 GAMMA 556 is a high performance muzzle brake for eliminating recoil. It was designed using state of the art engineering techniques, utilizing CFD (Computational Fluid Dynamics) and CAE (Computer Aided Engineering). This product is 100% CNC machined for optimal performance.The VG6 GAMMA 556 is a muzzle brake and compensator hybrid. It virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter confidence and...

This VG6 GAMMA 556EX version is designed for 14.5" barrels to make 16.1" overall length with pinning. This is a high performance muzzle brake for eliminating recoil. It was designed using state of the art engineering techniques, utilizing CFD (Computational Fluid Dynamics) and CAE (Computer Aided Engineering). This product is 100% CNC machined for optimal performance.The VG6 GAMMA 556EX is a muzzle brake and compensator hybrid. It virtually eliminates recoil and minimizes muzzle movement. The...

The VG6 GAMMA 762 is a high performance muzzle brake for eliminating recoil. It was designed using state of the art engineering techniques, utilizing CFD (Computational Fluid Dynamics) and CAE (Computer Aided Engineering). This product is 100% CNC machined for optimal performance.The VG6 GAMMA 762 is a muzzle brake and compensator hybrid. It virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter confidence and...

The next evolution in Pistol Caliber Carbine recoil control has finally arrived. The VG6 GAMMA 9mm sets a new standard when it comes to recoil management by virtually eliminating any muzzle movement. This muzzle brake / compensator hybrid virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter confidence and allows the shooter to make very fast follow up shots. Its unique porting design has been optimized for...

The VG6 EPSILON 556 is the pinnacle of AR15 muzzle devices. The EPSILON 556 just outperforms everything on the market. Designed for the discriminating shooter and professional end-users, VG6 Precision's EPSILON 556 affords you the best muzzle control and recoil mitigation the industry has to offer. This is a true combination muzzle brake / compensator / flash hider. Its performance is matched only by the amazing look of this device. The VG6 Epsilon 556 carries many of the same characteristics...

The VG6 GAMMA 300BLK is a high performance muzzle brake for eliminating recoil. It was designed using state of the art engineering techniques, utilizing CFD (Computational Fluid Dynamics) and CAE (Computer Aided Engineering). This product is 100% CNC machined for optimal performance. The VG6 GAMMA 300BLK is a muzzle brake and compensator hybrid. It virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter...