Rails and Accessories

Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc. Available in Black, OD Green and Flat Dark Earth. E.A.R. Export Administration Regulations Controlled Product / ...

The versatile Light Mount V-Block and Rings is a nearly-universal mounting solution for attaching a handheld light to compatible Magpul light mounts. Constructed of reinforced polymer and milspec-anodized aluminum, the Light Mount V-Block and Rings allow the user to install lights with a body diameter from .75" to 1.04" onto the MOE Scout Mount and M-LOK Cantilever Rail/Light Mount (comes pre-installed on the Magpul Rail Light Mount). In conjunction with these compatible Magpul mounts, the...

Product DetailsDesigned for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is...

Product DetailsThe Magpul M-LOK Bipod Mount allows for the attachment of Harris-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is...

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooters hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other...

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly...

M-LOK Type 1 Rail Covers are low-profile and light weight covers that install directly onto M-LOK compatible systems. Made of an extremely heat resistant flexible material, these covers offer an enhanced gripping surface. At 9.5 in length they cover six full M-LOK slots but can be cut for customized length or to combine colors. Includes two Covers per package. FEATURES: Compatible with all M-LOK systems Non orientation specific - no up/down, left/right, front/back orientation Low profile and...

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards. These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function, feature beveled contours to minimize potential snagging, utilizes our TSP texture for additional grip, and protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile. The center locking tab is pre-scored to...

Product DetailsThe M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses. A self-locking reusable thread patch is added to the screws to ensure a secure fit upon installation.Made in U.S.A.E.A.R.Export...

The M-LOK Tape Switch Mounting Plate is a mount designed to attach Surefire ST pressure pads on M-LOK compatible systems. It is molded of the same high quality polymer as other Magpul products providing light weight with extremely rugged construction, and the M-LOK recoil lugs and T-Nuts make for an extremely secure mounting system. A low profile design allows the user more mounting options without interfering with other equipment and its rounded and beveled edges provides a snag free surface....

The Magpul M-LOK to MOE Adapter Kit is designed specifically to adapt many M-LOK compatible accessories to legacy MOE Hand Guards and Forends. The M-LOK to MOE adapter plates are customizable to length by snapping sections off at the pre-determined locations which help ensure a near seamless installation. Adapter plates of various sizes and all replacement hardware are included. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

Ambidextrous platform to mount weapons lights on M-LOK compatible hand guards and forendsProprietary heavy-duty polymerFeatures beveled ends and corners to reduce snagging and sharp edgesAllows for the direct attachment of the Surefire M300-600 series of Scout Lights or other MIL-STD-1913 Picatinny light and optic mount

The MOE Stock Commercial-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most...

Product DetailsDesigned for use with MOE Hand Guards and Forends, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to integral mounting...

Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

DESIGNED AND INTENDED FOR LIGHT/LASER CABLE MANAGEMENT Half-slot size allows for precise positioning CAN BE RECONFIGURED MULTIPLE TIMES Six (6) assemblies per package

DESIGNED AND INTENDED FOR LIGHT/LASER CABLE MANAGEMENT Half-slot size allows for precise positioning CAN BE RECONFIGURED MULTIPLE TIMES Six (6) assemblies per package

XT Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved weapon control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail. One panel per package. Available in Black, Foliage, FDE and ODG. E.A.R. Export Administration Regulations Controlled Product

Each set comes with (4) two-piece panels which will cover ONE side of a carbine rail. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...