Gun Accessories & Parts

The Super Sabra Lightning Bow Trigger is precision machined from precipitation hardened 17-4 and is designed to replace the standard trigger in IWI Tavor rifles. Once installed, the Sabra Lightning Bow is adjustable via a set screw that removes the slack that is inherently found in the trigger mechanism of those rifles. By removing the slack, the trigger pull is instantly transformed into a feel that is much more familiar to that of an M4 Carbine. Pairing the Sabra Lightning Bow with a Super...

The Geissele Super Sabra was born from the combat heritage of the SSA and is a drop in replacement for the OEM trigger pack. It is a precision two-stage trigger and allows precise and accurate trigger control. The Super Sabras two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for close quarter combat (CQB). The Geissele Super Sabra also features an adjustable first stage, which will allow the shooter the ability to fine tune the first...

The Geissele Super SCAR is designed similarly to the Geissele SSA. The Super SCAR is a 4.0lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. Specifications Size: Standard Mil-Spec Pin Trigger Bow Type: M4 Curved Weapon Platform: SCAR Type: 2 Stage 1st Stage Weight: 2.5 lbs. 2nd Stage Weight: 1.5 lbs. Total Pull Weight: 4.0 lbs. Adjustable: No Recommended Use: Law Enforcement, Home Defense, Hunting Pin Size: Mil-Spec All...

The Geissele Super Select-Fire (SSF) Trigger is a select-fire combat trigger that Geissele Automatics developed for the U.S. Special Operations Community. The SSF is a non-adjustable combat style two-stage trigger that is available in 4.5lb. and 5.5lb. configurations. In semi-automatic mode, the SSF is a precision two-stage trigger that allows precise and accurate trigger control. In fully-automatic mode, the SSF is a single-stage trigger with a smooth, continuous trigger pull and abrupt...

The Geissele Super Semi-Automatic (SSA) trigger is a semi-automatic only version of Geissele Automaticss Super Select-Fire trigger. The SSA is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The SSAs two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for CQB. The SSA is safety certified by Crane Naval Surface Warfare Center. It is recommended for demanding...

Built on the chassis of the Geissele SSA, the Super Semi-Automatic Enhanced (SSA-E) provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger. The SSA-Es reduced first and second stage pull weights result in a trigger with a smooth, light first stage take-up and a crisp, candy cane-like second stage break. The SSA-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and...

Finely-tuned semi-automatic-only version of our full-auto, two stage combat trigger presently used in the U.S. Special Operations Community. The large pin dimension is 0.169 inches, whereas the standard pin dimension is 0.155 inches. Built on the chassis of the Geissele SSA, the Super Semi-Automatic Enhanced (SSA-E) provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger. The SSA-Es reduced first and second...

The Super Tricon Trigger comes standard with a two-stage design for safety and control; a carrot-like 2nd stage break; full-power hammer spring; tool steel construction; and unique trigger bow design with ribbed surface. Specifications Size: Standard Mil-Spec Pin Trigger Bow Type: Hybrid Weapon Platform: AR15/AR10 Type: 2 Stage 1st Stage Weight: 2.5 lbs. 2nd Stage Weight: 2.0 lbs. Total Pull Weight: 4.5 lbs. Adjustable: No Recommended Use: Law Enforcement, Home Defense, Hunting Pin Size:...

Mil-Spec M4 Upper Receiver Assembly Geissele Reliability Enhanced Bolt Carrier Group Geissele Airborne Charging Handle, DDC Geissele SMR MK16, DDC, 9.3" Geissele 5.56MM 10.3",GOV profile, CHF, Chrome Lined, Carbine Gas, Mag Phos, ChromolyV, 1/7 Twist, Barrel Geissele Super Gas Block .750 Low-Profile Gas Block, Pinned (Bombproof Installation) SureFire SF4P 4 Prong Flash Hider Super 42 Braided Wire Buffer Spring and H3 Buffer Combo INCLUDED! ...

This upper receiver group is a Complete 11.5" variant of the Geissele URG-I. NFA DISCLAIMER/WARNING: This item does not meet the 16" minimum barrel length requirement, and requires registration and a tax stamp with the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) when assembled into a complete rifle. Additional state and local restrictions may apply. It is the sole responsibility of the buyer to comply with any and all applicable laws ...

SPECS: Mil-Spec M4 Upper Receiver AssemblyGeissele Reliability Enhanced Bolt Carrier GroupGeissele Airborne Charging Handle, DDCGeissele SMR MK16, DDC, 13.5"Geissele 5.56MM 14.5" GOV profile, CHF, Chrome Lined, ML Gas, BarrelGeissele Super Gas Block .750 Low-Profile Gas Block, Pinned (Bombproof Installation)SureFire SF4P 4 Prong Flash Hider, Pinned & WeldedSuper 42 Braided Wire Buffer Spring and H1 Buffer Combo INCLUDED! ...

UPPER RECEIVER - Mil-Spec with Indexing Marks and M4 Feed Ramps. 7075-T6 Aluminum, Type III Hard Coat AnodizedBARREL - 4150CMV Steel, Stress Relieved, Armornite® Treated, 1:8 Twist, 5R Rifled, GVAC™ Profile, Nickle Boron Coated barrel Extension, 1/2X28 TPI Muzzle ThreadsGAS SYSTEM - Pinned Low-Pro GVAC™ Gas Block, 4140CM Steel, Mid-Length GVAC™, Direct-ImpingementMUZZLE DEVICE - Gemtech ETM™ Flash Hider, 4140CM SteelBOLT CARRIER GROUP - Carpenter 158 steel bolt, 8620 Steel Carrier, Mil-Spec MP...

The THenar was designed to enhance the operators ability to consistently place their grip in the same location. Additionally, the THenar incorporates a quick detach sling swivel mount, reducing the number of accessories on your rail. Doing more with less, enhancing target engagement time, while increasing weapon control, the THenar will dramatically improve your shooting performance. THenar picatinny comes with one THenar, Instructions, Bridge and screw. THenar MLOK version comes with one...

The Lancer Adaptive Magwell is machined from 6061 T6 aluminum and is designed to fit mil-spec 5.56 AR style rifles.It is installed by opening the winter trigger guard and attaching the lower half to the trigger then engaging the lower component to the trigger guard attachment on the rifle.The upper component is then slid on from the front and attached with two allen screws.This will increase the diameter of the magwell increasing the speed with which the rifle can be reloaded.Note: Magazine...

LCH Octagon HandguardsAvailable with or Without Full Length Sight RailOctagon Carbon Fiber Handguards - Lancer has selected a carbon fiber layup and resin combination that will resist the heat associated with high volumes of small arms fire, and is rigid enough for heavy use. Cooling slots have been provided to manage barrel temperature.7075-T6 Aluminum Components - Where necessary, aircraft grade aluminum has been used to ensure the durability and reliability of the handguard assembly, such...

Standard Bolt Carrier Group includes the Bolt, Bolt carrier and Gas key.

The LMT tactical adjustable rear sight offers a co-located sight picture to back up reflex sight systems. Forward and backward compatible with M16-type weapons families. Robust design and removable to fit any Mil-Std 1913 rail. Adjustments match current M4-type operation both in function and capability. Note: Items marked as Special Order are ordered from the manufacturer. Being a manufacturer direct dealer, we are dependent on their warehouse inventory and production schedule. While most...

The 22UpLULA? loader & unloader is made for loading .22LR wide body mags. > 1/2″, like .22LR converted 1911 mags and other .22LR converted mags. It has the body width of our UpLULA? and has a narrower metal beak designed for .22LR rounds. Tip: Use our 1911AI? Aligner Insert to assist loading 1911-wide .22LR wide with the 22UpLULA?. Note: the 22UpLULA? will not load .380 to .45 cal. mags. ! For more fit information, see:http://www.maglula.com/product/22uplula-22lr-double-stack-mag-loader/ ...

Loads all: AK47 7.62 x 39 magazines; and, Galil 5.56 x 45mm magazines. Benefits: All-in-one magazine speed loader and unloader!: Simple to use in either mode Eliminates thumb pain and injury Eliminates wear on feed lips Prolongs magazine life Lightweight and fits in pocket Reliable in all weather Durable reinforced polymer Tested and combat proven ...

Description Armalite AR10B GenII LULA? 7.62 / .308 magazine loader and unloader. Fits 5, 10, 15, 20, and 25 round AR10B Gen. II Armalite metal magazines. Benefits: All-in-one magazine speed loader and unloader ! Simple to use in either mode Eliminates thumb pain and injury Eliminates wear on feed lips Prolongs magazine life Lightweight and fits in pocket Reliable in all weather Durable reinforced polymer Tested and combat proven Note: Some AR10B magazine?s follower tilting problems may require...

M-16 / AR-15 LULA? loader and unloader for all such metal and plastic 5.56mm / .223 magazines, including PMAG?s and Lancer. Loads 10, 20, 30, 40 & 100 round 5.56 / .223 magazines, like:: M16 / AR15 / M4 USGI (NATO STANAG 4179) Magpul PMAG H&K metal 416 / SA80 Beretta AR 70-90 Thermold Orlite SIG Arms (black mags) Benefits: All-in-one magazine speed loader and unloader ! Simple to use in either mode Eliminates thumb pain and injury Eliminates wear on feed lips Prolongs magazine life Lightweight...

The new Range BenchLoader? loader is heavy-duty industrial 5.56 x 45 / .223 cal magazine loader made to load a magazine in a single hand stroke. It is intended for daily loading of hundreds of magazines at shooting ranges and armories. It totally eliminates any fingers? pain and injury, shortens loading time, and keeps the magazines lips intact. Made for heavy shooters ? the new Range BenchLoader? loaders are heavy-duty industrial 5.56 x 45 / .223 cal 30rd magazine loaders. Daily loading of...

M-16 / AR-15 10-round StripLULA loader and unloader for all such metal and plastic 5.56mm / .223 magazines, including PMAGs and Lancer. Loads both 10-rd Stripper clips and 10 loose rounds. A simple unloader.* Small & durable. Loads 10, 20, 30, 40 & 100 round 5.56 / .223 magazines, like: M16 / AR15 / M4 USGI (NATO STANAG 4179) Magpul PMAG H&K metal 416 / SA80 Beretta AR 70-90 Thermold Orlite SIG Arms (black mags) Benefits: All-in-one 10rd stripper clip and loose rounds magazine loader and...

Description Mini-14 10-round StripLULA? magazine loader and unloader for original Ruger metal 5.56mm / .223 magazines. Designed to load original Ruger Mini-14 (5.56 / .223) magazines, but may also load some aftermarket Mini-14 mags. A simple unloader. Small & durable. Benefits: Eliminates fingers pain and injury. Easy and quick loading. Prolongs magazine life. Reliable in all weather. Durable reinforced polymer. Ambidextrous. ...

Description MP5 SMG LULA? loader and unloader for curved metal 9mm magazines. Fits curved 15 and 30 round 9mm MP5 SMG, HK94, and SP89 metal magazines. Avoid use on older straight magazines as loading and unloading will not be as smooth. Benefits: All-in-one magazine speed loader and unloader ! Simple to use in either mode Eliminates thumb pain and injury Eliminates wear on feed lips Prolongs magazine life Lightweight and fits in pocket Reliable in all weather Durable reinforced polymer Tested...

Fits 5, 10, 20, and 25 round SR25 type 7.62 / .308 metal and polymer mags, made by: Magpul DPMS Knight Armament POF USA Lancer LaRue Tactical C-Products Oberland Arms This loader does not fit early AR10 waffle mags. Benefits: All-in-one magazine speed loader and unloader!: Simple to use in either mode Eliminates thumb pain and injury Eliminates wear on feed lips Prolongs magazine life Lightweight and fits in pocket Reliable in all weather Durable reinforced polymer Tested and combat proven ...

The UpLULA? is a military-grade universal pistol magazine loader and unloader designed for loading and unloading virtually all* 9mm Luger up to .45ACP magazines, single and double stack and 1911?s of all manufacturers. It will also load most .380ACP double-stack mags. The UpLULA? loader does it all easily, reliably, and painlessly! Loads all* 9mm Luger, .357 Sig, 10mm, .40, and .45ACP cal. single and double stack magazines., including 1911 mags, of all manufacturer, and also loads most .380ACP...

The Magpul ACS (Adaptable Carbine/Storage) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options.Similar to the Magpul CTR, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes...

The Magpul ACS (Adaptable Carbine/Storage) Mil-Spec Model is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. Similar to the Magpul CTR, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes excessive...

The Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please...

Product DetailsThe Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package.Made in U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product ...

Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. Made in U.S.A. E.A.R. Export...

The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon...

The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4...

Magpul BipodThe Magpul Bipod for 1903 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed...

Magpul BipodThe Magpul Bipod for 1903 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed...

Magpul BipodThe Magpul Bipod for A.R.M.S.17S Style offers serious strength and versatility at a price that provides unmatched value. It is designed to be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and is used for proper mounting to your weapon system of choice. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and...

Magpul BipodThe Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod...

IMPROVES SINGLE-ARMED USE OF LARGE-FORMAT PISTOLS Designed and intended for use as a stabilizing accessory for one-handed firingM-LOK compatible slots for additional sling mounting options Ambidextrous rear QD cup allows sling tension to be applied while firing with one hand to improve stability Toolless, single-handed adjustment SIMPLE, STRONG CONSTRUCTION High-strength polymer and metal construction COMPATIBILITY Mil-Spec sized carbine receiver extension equipped AR Pistols. Not compatible...

The Magpul CTR (Compact/Type Restricted) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept...